Measurement And Adjustments - Panasonic PT-LC75U Service Manual

7. Measurement and Adjustments

7.1. Adjustment Procedure Flowchart
7.2. Cautions for Adjustment
- Never turn off the MAIN POWER switch until every fan completely
stops.
- To maintain and ensure safety, always use the designated
components for replacement parts.
- If removing any clamps, lead wires or connectors, always place
them back in their proper locations.
- Be careful not to damage the lead wires or components when using
a soldering iron or similar tool.
7.3. Setting Before Adjustment
- Set up the projector to obtain the projection distance below.
- Turn the zoom ring of the projector to obtain the largest size of the
picture.
7.4. Convergence Adjustment
7.4.1. Basic Adjustment Procedure
29