Table of Contents
Advertisement
b.
Verify the hole in the cell modem aligns with the hole on the DXM board.
c.
Firmly press the modem into the 24-pin socket.
6.
Attach the antenna cable between the cellular modem board to the base board. The antenna cable uses the top an-
tenna connection.
Activate a 4G LTE CAT M1 Cellular Plan
Activate a cellular plan for your DXM Controller using the Banner Cloud Data Services website.
1.
Go to
celldata.bannercds.com
2.
If you have previously created an account, click Login and enter your username and password to continue.
3.
If you are creating a login for the first time:
a.
Select the region in which the device will operate.
b.
Select the cellular subscription plan. Please use the calculator and regional coverage information to determine
the plan needed for your device
works/iot-cloud-cellular-data-services/cellular-data-plans/Service-Plan-Calculator.html).
c.
Create a username and password (use an email address for the username).
d.
Enter your payment information, mailing address, agree to the terms and conditions.
4.
Go to the My Services and Equipment section.
5.
Enter the SIM Number (ICCID) and the Module Number (IMEI).
The ICCID is the 20-digit number of the SIM, the bottom barcode number on the SIM card carrier. If the carrier card is
not available, the ICCID is also printed on the SIM card, but must be removed from its socket to be read. The IMEI is
the 15-digit number on top of the 4G LTE device.
6.
Click Activate.
Although new activations are typically functional in 20 minutes or less, it may take up to 24 hours for the cellular plan
to become active on the wireless network.
Activate a Worldwide 4G LTE MNB-IOT Cellular Plan (RED-CE)
The Worldwide 4G LTE-M/NB-IOT cellular modem is operational in those European countries that are members of the EU/
EEA and adopt RED/CE-compliant products.
An international roaming SIM is provided with the Worldwide module and may be activated following the steps listed in "Acti-
vate a 4G LTE CAT M1 Cellular Plan " on page
card. In this case, a local SIM card must be activated and operated with this device to acquire connectivity services.
1.
Work with the local Banner technical support person to identify and purchase machine-to-machine (M2M) (data plan
only) SIM cards in 3FF 'micro' form factor.
Typical monthly data use will be 20-50 MB per month. When choosing a plan, pay close attention to data rates.
2.
When activating the SIM, note the Access Point Name (APN) that the SIM provider states to use with their SIM.
The IMEI is the 15-digit number on top of the cell module PCB, below the words Telit ME910G1-WW and above the
barcode. The ICCID is the 20-digit number printed on the SIM card itself.
July 26, 2023
to purchase cellular data plans.
(https://www.bannerengineering.com/us/en/products/wireless-sensor-net-
Enter the ICCID and IMEI numbers then click Activate
41. However, there may be regions that are not covered by the provided SIM
© Banner Engineering Corp.
DXM700-Bx Wireless Controller Instruction Manual
41
Advertisement
Table of Contents
Need help?
Do you have a question about the DXM700-Bx and is the answer not in the manual?
Questions and answers