Connecting Video Equipment - Toshiba TLP510 Owner's Manual

Connecting Video Equipme:
Check trat the power for the projector and computer are off
before connecting the cables.
put Terminals
Check that the power for the projector and computer are off
before connecting the cables.
f} To S-VIDEO
To AUDIO R (red)
To AUDIO L (white)
To VIDEO (yellow)
S-VIDEO cable
(Use only when you project
an S-VIDEO signal.)
Not supplied
'Supplied cable
To the S-VIDEO
output jack
To the VIDEO
cutput jack (yellow)
To the AUDIO
output L jack (white)
Video tape player
To the AUDIO
output R jack (red)
CED © ¢
You can connect an
extra monitor to view
the picture.
You can connect a
'computer to controt
the projector.
(For details, [43\\, [44\)
To MONITOR OUTPUT AUDIO
@ 3.6mm stereo mini plug
4 To the audio
input jacks
(The sound output level
is constant.)
©
OQ)
Connect a stereo system
for dynamic sound.
Diictes@
* When both the VIDEO (pin plug) jack and the S-VIDEO jack
are connected, the signal through the S-VIDEO jack has
priority.
To project a signal through the VIDEO (pin plug) jack, leave
the S-VIDEO jack unplugged.
* When you play a monaural sound audio signal, use the
AUDIO L (white) jack only.
EE |
* The sound of the source selected with the INPUT button is
the output to the stereo system, etc.
* The cables for the connections above are not supplied. Use
separately available ones.
* The MONITOR OUTPUT connector always send out the
video signal that was input to the RGB INPUT connector
regardless of the selected input source.
CONNECTIONS
14