Table of Contents
Advertisement
Linx
Chapter 2: StrideLinx Cloud 2.0
Update Router Settings (cont'd)
Wi-Fi Hotspot
The SE-SL3011-WF StrideLinx VPN Router can serve as a
Wi-Fi hotspot for LAN devices, either with a wired WAN connection or
simultaneously with a wireless WAN connection. The Wi-Fi hotspot can be used to:
•
Wirelessly access your machine while you are on-site.
•
Wirelessly access the internet, if allowed.
•
Wirelessly connect machine components.
The Wi-Fi hotspot can be remotely enabled/disabled from your StrideLinx account, as follows.
1.
In the Fleet Manager menu, select Devices
2.
Expand the Network
3.
Check the [Enable wifi hotspot] box in the "Wi-Fi hotspot" section.
4.
Enter the Network name (SSID), set a Password , and select a channel for your hotspot.
NOTE: The StrideLinx router can only use the 2.4GHz band and only channels 1 - 11.
5.
You have now made the changes in StrideLinx Cloud, but these are not yet active in your
device. Click [Push config to device] in the top right corner for them to take effect.
Network Time (NTP) Server
The router runs a Network Time Protocol (NTP) server, which
automatically and periodically syncs its own time with StrideLinx Cloud.
The Real Time Clock and NTP server built into the router allows the entire machine line
connected to the router to sync their time, preventing time drift. This guarantees identical
internal clocks.
NOTE: NTP does not acknowledge time zones. Instead, it manages all time information based on UTC. To
convert UTC to local time, you'll need to apply the local time zone in the machine itself.
To have your machine utilize the router's NTP server, enter the router's LAN IP address in
the NTP settings of your machine. If possible, apply the correct time zone in the machine's
time settings.
StrideLinx™ Cloud 2.0 Industrial VPN Routers User Manual
options and go to [LAN].
The Network name (SSID) is case sensitive.
, then click the name of your router.
1st Edition Rev. C
Online Help
Online Help
2-22
Advertisement
Table of Contents
Need help?
Do you have a question about the StrideLinx SE-SL30011 and is the answer not in the manual?
Questions and answers