Setting The Speaker Mode - Samsung HT-AS720S Instruction Manual

Setting the speaker mode

Signal outputs and frequency response from the speaker will be adjusted according to your speaker configuration
and whether certain speakers are used or not.
22
All manuals and user guides at all-guides.com
REMOTE CONTROL
1
Press SETUP/MENU button, and then press the ENTER button.
"SETUP MODE" appears on the display and goes into Setup Mode.
•
2
Press
press the ENTER button.
3
Press
Each time you press this button, FRONT ➝ CEN ➝ SURR ➝ S.BACK ➝
•
SUB ➝ CROVR will be selected in turn.
4
...†
Press
for the selected speaker.
5
Repeat steps 3-4 to set the mode for each speaker.
To exit setup mode
Wait for about 5 seconds or press SETUP/MENU button.
•
"SETUP OFF" appears on the display and Setup Mode is exited.
Using the SPK SELECT button
1 Press SPK SELECT button to select the speaker you want.
Each time you press this button, FRONT ➝ CEN ➝ SURR ➝ S.BACK ➝
•
SUB ➝ CROVR will be selected in turn.
...†
2 Press
for the selected speaker.
3 Repeat steps 1-2 to set the mode for each speaker.
To turn the SUBWOOFER on or off.
Press SUBWOOFER button on the remote.
Each time you press this button, SUB : YES, SUB : NO will be selected in turn.
•
If FRONT is set to LARGE, you can select YES or NO for SUB.
•
If FRONT is set to SMALL, SUB is automatically set to YES.
•
NO cannot be selected.
√
button to select the "SPK SETUP", and then
button to select the speaker you want.
button to set the mode (LARGE, SMALL etc.)
button to set the mode (LARGE, SMALL etc.)