Table of Contents
Advertisement
Selecting additional settings
Performing a Self Test
Perform a
Self Test
that your wine conditioning unit is not
working properly and want to check if it
is suffering from any problems.
In Settings mode , use the and
sensor controls to select the
and select OK to confirm your
Test
selection.
Touch the sensor control if you
wish to terminate the process.
The
starts and the wine condi-
Self Test
tioning unit is checked for any faults or
malfunctions.
- The message
System restart
in the display if the Self Test does not
discover any faults or malfunctions.
- If the Self Test does discover any
faults or malfunctions, they are indi-
cated as error messages in the dis-
play.
An alarm will also sound.
If you find the alarm disruptive, you
can switch it off in advance by touch-
ing the sensor control.
Make a note of the error message(s)
displayed.
Contact Miele Service and inform
them of the error message(s) on the
display.
Confirm the message with OK.
will appear on the display.
System restart
The wine conditioning unit briefly
switches off and then back on automat-
ically.
66
if you are concerned
Self
appears
Self test completed
play.
Confirm the message with OK.
The main screen appears in the display
again.
will appear on the dis-
Advertisement
Table of Contents
