ABB HOMAC UT 3 Operating Instructions

1 of 2
—
OPER AT I NG I N ST RU C T I O N S
Installing tool, UT 3
For all 1/2" and 5/8" compression connectors
TM
WARNING:
• Risk of shock, disconnect power before installation.
CAUTION:
• Product should be operated by a qualified electrician in
accordance with national and local electrical codes.
Important
Read and understand all instructions and
safety information in this manual before
operating or servicing this tool. Be aware of
proper usage and potential hazards.
This lightweight (35 ounces) pocket size tool features SHURE-SQUEEZER™ DESIGN -
a proven ratchet and pawl mechanism which is designed to deliver proper
compression before the jaws will release.
It installs the complete range of 1/2" and 5/8" self-insulated and bare SHURE-SPLICER™
service connectors, in addition to one and two hole lugs, pin terminals, tees, splices
and the UB212 and UB214 street lighting tap, simply by removing and reversing the
coded upper die in the tool head.
Installation time is quicker because one stroke of the tool develops a full
circumferential compression.
The tool frame is precision cast of steel with plastisol cushioned handles.
Because the tool has relatively few moving parts, maintenance consists of an
occasional oiling of pivot and link pin areas.