NARDA LR-01 User Manual page 62

2.6 Installation of the Turn off the LR-01, connect the proper adapter to the upper round multipole
connector and insert the field probe into the probe connector on the adapter,
LR-01
taking care that the key (red dot in case of 8053 family probes) is aligned.
Then, connect the supplied fiber optic to the OPTIC LINK connector taking
care that the spigot matches the housing.
Connect the other end of the fiber optic to the provided USB-OC (taking care
that the grip recess points towards the centre of the device) or any other of
the available ports (for example: wired USB). Connect the converter to a PC
port.
Fig. 2-1 LR-01 link with USB-OC
The USB-OC standard accessory connected to the LR-01 allows a 40m
maximum fiber length. The standard length supplied is 10 m.
Both with the fiber optic and with the USB cable, the provided software
automatically establishes the connection on the proper port, giving the User
the possibility to choose the desired one when more than one instrument are
connected at the same time.
2-2 Installation and use