Panasonic A Series Service Manual page 9

6.2 Disassemble PC DOOR
hook
COVER HINGE TOP
screw
Remove 3 screws, take out
the HINGE TOP and then
disassemble the PC DOOR
6.3 Disassemble LED light
3 hook
Use flat head rod to loosen
at 3 hook position to take
COVER LED out
6.4 Disassemble COVER DUCT PC AS.
screw cover
Position of COVER DUCT
PC AS.
Use flat head rod to pull
COVER HINGE TOP
out
Notice: Apply grease to the areas
of circles of hinge center
Connector
hook
Undo connector and remove
PAS- LED PCB at the position of
hook
Use flat head rod to open
screw cover
9
Disassemble connector
Take out 3 screw then
remove COVER DUCT PC AS.