NEC N8103-100 User Manual page 51

5.
Change the Default Write Policy to "Write Back" if not specified.
6.
To change the Default Write Policy:
6-1. Select the Logical tab in the left frame of the window, and then select each "Virtual Disk" under
the Logical tab.
6-2. Select the Set Virtual Disk Properties under the Operations tab in the right frame of the
window, and change the Default Write Policy to Write Back.
6-3. Repeat Steps 6-1 and 6-2 for all Virtual Disk under the Logical tab to change their Default
Write Policy to "Write Back".
"Logical" tab
"Operations" tab
Set Virtual Disk Properties
Operations
Default Write Policy : Write Back
29