Kenwood KC-207 Instruction Manual page 17

Stereo control amplifier
Table of Contents

Advertisement

@ POWER switch (U.S.A. and military models)
AUDIO:
Press to turn the stereo system ON. Press again
to turn the stereo system OFF.
TV:
Press to turn the TV ON. Press again to turn the TV
off.
@ POWER switch (other models)
Press to turn the power on for whole system.
@ TV
(KMT-1026,
KMT-2026S)
operation
keys (TV FUNCTION)
(U.S.A.
and military
models)
Note: With the supplied remote control unit, only
KMT-1026,
KMT-2026S
(monitor
TV)
can
be
operated.
TV/VIDEO key
Use this key to select the type of signal that the monitor
will receive: TV, VIDEO 1 or VIDEO 2.
RECALL key
Press the recall key and both the time and channel will be
displayed continuously. Press it again and they will disap-
pear. The timer function can be utilized as well but the
time will not continuously be displayed.
Channel tuning UP/DOWN keys (TV CH.) (A/V)
Press the channel up (A) key to tune in higher channels,
and the channel down (7) key to tune in lower channels.
Press the key continuously until the channel number you
wish to receive appears on the upper right side of the
screen.
ANT/AUX key
Press this key to set the ANT and AUX indicator to agree
with the antenna input source.
fis
—»
VIDEO 1 ———»
VIDEO 2 |
TIMER key
Press the timer key to set desired time.
VOLUME keys
Apply steady pressure to the VOLUME UP or DOWN but-
tons, to increase or decrease the volume as desired.
© Surround volume keys (REAR LEVEL)
These surround volume keys (REAR LEVEL) function the
same
as the LEVEL
(UP, DOWN)
keys on the optional
SS-97 Surround processor.
®
This key is effective only when the optional SS-97
Surround Processor is used.
@® Amplifier (KC-207) operation keys
(These function same as the operation keys
on the amplifier.)
VOLUME keys (UP/DOWN)
Controls the volume of the speakers and headphones.
Press the UP (A) key to increase the volume level and,
press the DOWN (VV) key to decrease it.
Note:
The volume
is raised
up to the level preset at the control
amplifier.
@® Turntable (KD-77F, KD-67F, KD-47F)
operation keys (PHONO)
Play key (<1)
Press to start record play automatically.
For KD-67F,
select the record size when
turning the
power on, before starting play with this key.
Stop key (MM)
Press to stop play; the tonearm returns to the rest and the
platter stops rotating.
Auto function
(PHONO, TUNER, CD, TAPE, VIDEO)
For example,
when
you listen to the record,
pressing the
VIDEO 1 key enters the units VIDEO mode and vice vasa.
Kc-207 (kK) 17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents