1. Manuals
  2. Brands
  3. Hanwha Vision Manuals
  4. IP Audio systems
  5. SPA-C100W
  6. User manual

Hanwha Vision SPA-C100W User Manual

Hide thumbs Also See for SPA-C100W:
Table of Contents

Advertisement

Quick Links

Download this manual
IP AUDIO SYSTEM
User Manual
SPA-C100B/SPA-C100W
SPA-C110B/SPA-C110W
SPA-W100B/SPA-W100W
SPA-H100B/SPA-H100W
SPA-P100B/SPA-P100W
SPA-D1000

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SPA-C100W and is the answer not in the manual?

Questions and answers

Related Manuals for Hanwha Vision SPA-C100W

Summary of Contents for Hanwha Vision SPA-C100W

  • Page 1 IP AUDIO SYSTEM User Manual SPA-C100B/SPA-C100W SPA-C110B/SPA-C110W SPA-W100B/SPA-W100W SPA-H100B/SPA-H100W SPA-P100B/SPA-P100W SPA-D1000...
  • Page 2 ※ Appearance, specification, etc. of the product is subject to change for performance improvements without prior notice. The latest update is available on the official Hanwha Vision website. (www.HanwhaVision.com) ※ The ID for the initial login is “admin, ” and a password should be set.
  • Page 3 overview WARNING CAUTION TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
  • Page 4 overview IMPORTANT SAFETY INSTRUCTIONS 22. Do not install on a surface where it is exposed to direct sunlight, near heating equipment or heavy cold area. 1. Read these instructions. 23. Do not place this apparatus near conductive material. 2. Keep these instructions. 24.

  • Page 5: Table Of Contents

    Module (SPA-D1000) Control Mode Names and functions of the IP speakers System Settings (ceiling-mount type) Maintenance (SPA-C100B/SPA-C100W) Names and functions of the IP speakers (ceiling-mount type, flame retardant structure / Plenum rate) (SPA-C110B/SPA-C110W) Names and functions of the IP speakers...

  • Page 6: Names And Functions Of The Ip Audio Module (Spa-D1000)

    NAMES AND FUNCTIONS OF THE IP AUDIO MODULE (SPA-D1000) NAMES AND FUNCTIONS OF THE IP SPEAKERS (CEILING-MOUNT TYPE) (SPA-C100B/SPA-C100W) Side a b c ALARM PoE+ GND IN ALARM STAT PoE+ GND IN RESET STAT RESET AL AR GN D —...

  • Page 7: Names And Functions Of The Ip Speakers (Ceiling-Mount Type, Flame Retardant Structure / Plenum Rate) (Spa-C110B/Spa-C110W)

    NAMES AND FUNCTIONS OF THE IP SPEAKERS (CEILING-MOUNT TYPE, FLAME RETARDANT STRUCTURE / PLENUM RATE) (SPA-C110B/ SPA-C110W) Name Function Description Screw A screw for securing the speaker terminal cover. Safety cable hook Secures the speaker during installation to prevent it from falling. Audio module Equipped with an audio module.
  • Page 8 overview NAMES AND FUNCTIONS OF THE IP SPEAKERS (WALL-MOUNT TYPE) (SPA-W100B/SPA-W100W) Name Function Description Gasket Dustproof/waterproof gasket. Speaker terminal cover Covers the speaker terminal. Used for earth-grounding. Grounding port Grounding serves to protect the product from lightning strikes. Before connection, be sure to turn off the power of the device. Screw A screw for securing the speaker terminal cover.
  • Page 9 NAMES AND FUNCTIONS OF THE IP SPEAKERS (HORN TYPE) (SPA-H100B/SPA-H100W) Name Function Description Gasket Dustproof/waterproof gasket. Audio module Equipped with an audio module. Used for earth-grounding. Grounding port Grounding serves to protect the product from lightning strikes. Before connection, be sure to turn off the power of the device. MicroSD card slot is not available.

  • Page 10: Names And Functions Of The Ip Speakers (Pendant Type) (Spa-P100B/Spa-P100W)

    overview NAMES AND FUNCTIONS OF THE IP SPEAKERS (PENDANT TYPE) (SPA-P100B/SPA-P100W) Name Function Description Used for earth-grounding. Grounding port Grounding serves to protect the product from lightning strikes. Before connection, be sure to turn off the power of the device. Speaker terminal cover Protects the speaker terminals.

  • Page 11: Broadcast System Configuration Diagram

    BROADCAST SYSTEM CONFIGURATION DIAGRAM Speaker Mode Block Diagram You can run a scheduled broadcasting, BGM, or TTS broadcasting using each speaker by itself. Controller Mode Block Diagram It is a block diagram for using the IP speakers in a controller mode. The controller mode speaker provides an operating GUI which is different from a regular speaker, and it can control multiple speakers via the button mode or event &...

  • Page 12: Connecting To Power And A Network

    overview CONNECTING TO POWER AND A NETWORK Network Cable Specification Item Contents Remark Connect the switching hub that supports PoE or PoE+ to the NETWORK port of the product using a network cable. If you connect the product to a switching hub that supports PoE+ or PoE, you can use it without a separate power Connector RJ45 (10/100BASE-T) source.

  • Page 13: Starting

    A speaker or an audio module is powered by PoE/PoE+. Use a switching hub that supports PoE or PoE+. The Device Manager Program ( ) is available on the official Hanwha Vision website (https://www.HanwhaVision.com) The IP microphone can receive power via PoE, or the DC power adapter can be used.
  • Page 14 Select the searched product in the Device Manager and run <FW Status Check> in the [FW] menu to get the firmware status (the latest or previous version). Check the firmware distribution information for each product on the Hanwha Vision website When you select multiple products (https://www.HanwhaVision.com) and download the latest firmware (modelname_version.imkp) to your PC.
  • Page 15 2. When the firmware update and reboot are complete, <Progress %> is displayed until 100% and then Registering with the product’s initial IP address <Success> is displayed. If you connect only one product to the switch hub, it is possible to set up the password even on the web 3.

  • Page 16: Logging In

    start LOGGING IN A maximum of five users can log in to the product at the same time. The <Exceed the maximum user> screen will appear if there is an attempt to log in while the maximum number of users are logged in, and it will show the currently Use the password set for the admin account.

  • Page 17: Environment Settings

    If you forgot the previous password, the product has to be initialized, and the passwords for all the 3. Select the upgrade file (model name_version.imkp) that you downloaded from the official Hanwha Vision accounts will be initialized during the process.
  • Page 18 environment settings - admin: You can use all the functions of the product. Setting the System Check Time - setup: You can use all the functions except for environment settings, such as System Upgrade, Sets the time for the system check. The system reboots automatically at the set time every day. Change Network, Change Time, etc.
  • Page 19 Restarting System Applying Background Images You can restart the system without disconnecting the power when a system reboot is needed. 1. On the Home screen, click <Environment Setting> ➔ <System Management>. 2. Under <Background Image>, press the [ ] button to select an image file, then click the [Apply] button.

  • Page 20: Network Settings

    environment settings NETWORK SETTINGS TIME SETTINGS You can change the network settings according to the user's network connection configuration. Set the time and date accurately or it may cause problems in operating the broadcast. 1. On the Home screen, click <Environment Setting> ➔ <Time Setting>. 1.

  • Page 21: Snmp Action Settings

    SNMP ACTION SETTINGS 2. Click [Apply] to apply the set Time and Date information. If the product is used in a local network environment without an external Internet connection, the time information may The SNMP protocol allows system or network administrators to remotely monitor and configure the network become incorrect due to the product's accumulated time errors.

  • Page 22: Device Operation Setting

    environment settings DEVICE OPERATION SETTING Select the power and operation mode of the speaker and audio module. 4. For the speaker, you can select one of two operational modes depending on its usage. ~ Controller: You should register only one controller speaker, and the rest should be set up in speaker mode.

  • Page 23: Home Screen Configuration

    ~ Source Name: The name of the Source Device will be displayed. Go to the Official Website If you click <Hanwha>, the screen will move to the Hanwha Vision Official Website. ~ Source Type: The source type of the Source Device will be displayed.
  • Page 24 using controller mode Output Device Audio Monitoring The speakers registered as the <Zone> of the area for broadcasting will be displayed in the Output Device You can monitor the status of the Output Device speakers registered in the <Zone> of the area to broadcast. list.
  • Page 25 ~ The output monitoring device can be controlled by clicking [Play] and [Stop]. Button Mode - The audio automatically stops 1 minute after it starts playing. You can broadcast either by selecting the buttons of the source device and output device connected to the - Repeatedly clicking the [Play, Stop] buttons within a second may cause abnormal operation.
  • Page 26 using controller mode ~ Source Control: BGM or TTS lists of the selected source device are displayed. ~ Group : You can select an output group among the set groups, and duplicate selection is also possible. The selected group will be displayed as highlighted. When you select a zone speaker to broadcast and select <Start Broadcasting>...
  • Page 27 If you press the number which is set as Zone or Group mode on the microphone device during the broadcast of the ~ Event & Preset: Select the contact closure (CP) number set in the <Event & Preset> menu to use this menu.

  • Page 28: Control Mode

    using controller mode CONTROL MODE 3. Set <Control Mode> as UDP. ~ In a UNICAST network, if you set the <Source Registration> ➔ <Transmission Method> to UNICAST Functions such as Control Mode (to control zone devices in Button Mode) and Contact Closure Operation Mode on the source device, you can simultaneously broadcast to up to 20 zones (20 output speakers).

  • Page 29: System Settings

    SYSTEM SETTINGS 4. If you select a device to register from the <Device Search> list and click the [ ] button, the device is moved to the <Registered Devices> list. Registers the device, source, and zone and sets the Event & Preset and annual schedules. ~ If you select the moved device and click the [ ] button, it returns to the <Device Search>...
  • Page 30 using controller mode Register Source Device ~ Transmission Method: If you select UNICAST, <Trans IP> will be deactivated, and the device’s IP address will be used. You can enter the <Port> number in the input window Speakers can be registered as source devices for broadcasts. <Source> means one speaker set as a automatically or manually, and it should not overlap with another device.
  • Page 31 Registering an RM Microphone ~ Transmission Method: If you select UNICAST, <Trans IP> will be deactivated, and the device’s IP address will be used. You can enter the <Port> number in the input window Register a microphone to broadcast via speakers. automatically or manually, and it should not overlap with another device.
  • Page 32 using controller mode Register Zone Group Setting You can register the speaker to the <Zone> of the region for broadcasting. <Zone> refers to one speaker set You can set the <Zone> to be broadcast by grouping it. as an output device. 1.
  • Page 33 All Event & Preset List PUSH MONITOR CHIME POWER NETWORK PUSH -6dB +3dB +6dB MONITOR CHIME VOLUME POWER NETWORK -6dB +3dB +6dB VOLUME MENU PRESET MENU ALARM PREV PoE+ PRESET NEXT ALARM PREV CHIME PoE+ NEXT STATUS RESET CHIME STATUS RESET TALK TALK...
  • Page 34 using controller mode Event Registration Setting - If you select the IP address as the microphone, the model name of the <Device Name> will be displayed and the CP can be selected from button_1~5. If you press the Contact Closure Number from among the five buttons on the left side of the microphone and press the <TALK>...
  • Page 35 Broadcasting Routing/DSP/Source Stream Settings Setting Local File Play When an event occurs, the BGM audio stored in the speaker which is selected as zone will be played. When an event occurs, you can broadcast the BGM sound source (mp3, wav) and TTS of the registered Local file playback does not support TTS sound sources, and is unrelated to the speaker's source source device to the designated zone.
  • Page 36 using controller mode Scheduler Schedule Setting Screen It is a screen where you can set schedules. Broadcast reservations can be set. With the scheduler, you can perform scheduled broadcasts to as many zones (output speakers) as you want If there are duplicate broadcast schedules (BGM, TTS audio source) at the same time, the schedule which is using the audio source of the speaker selected as a source device in the <Source Registration>...
  • Page 37 3. Repeat: Select a day, a period, etc. you want to set. ~ Repeat Option (Extension): Sets the set schedule to repeat on a weekly, monthly, or yearly basis. ~ Select Day: During the set dates, it runs only on selected days of the week. If you select days of the If you set up the <Once>...
  • Page 38 using controller mode ~ TTS: Enter sentences with the language to be used in the <Text for TTS> and select the language and Holiday Setup Event gender in Select Speaker. Click the [Holiday] button on the scheduler settings screen - Select language: English (US, GB), German, Spanish, French, and Russian are supported. and the <Holiday>...

  • Page 39: Maintenance

    MAINTENANCE View Log You can check logs generated in the product. Failover History Management The log items are different for each product, and they are recorded when the log operation occurs. The failure history for the product can be input and managed. 1.

  • Page 40: Home Screen Configuration

    Shows language options supported on the website. (Korean, English supported) Go to the Official Website If you click <Hanwha>, the screen will move to the Hanwha Vision Official Website. You cannot use contact closure input with a speaker by itself.
  • Page 41 Source File Management You can register an audio file for broadcasting. Be sure to format the microSD card in FAT32 (file system) before inserting it into the speaker. NTFS and exFAT (file systems) are not supported. A microSD card capacity of up to 32 GB is supported (SDHC, MLC, Class 10 or higher). We recommend Sandisk and Transcend products.
  • Page 42 using speaker mode BGM Streaming Broadcast Server Operation Information When you click the [Apply] button on <Broadcast Server Settings>, the server begins operation, and you - This is a function to directly transmit and play sounds that have been uploaded to Source File Management will be moved to the following screen which shows the source file list, playback information &...
  • Page 43 5. <Client Connection List> displays the information of other connected speakers (Activated, Deactivated 1. Click <BGM Streaming> ➔ <Broadcast Client>. status) only if the speaker transmission method is set to Unicast. ~ Click the [Start], [Stop] buttons to select whether to operate the Broadcast Client. If you set the speaker transmission method to Multicast, the information of other connected speakers will not be displayed, but the sound source play function will run.
  • Page 44 using speaker mode Chime File Management 4. Uploaded Chime files are displayed on <Chime File List> on the right side. Click the number of the source file to play through the PC speaker. If you broadcast TTS audio in the <Operate> ➔ <Button Mode> menu of the speaker used for the <Controller mode>, the chime sound source is provided at the start and end of the broadcast.
  • Page 45 ~ When you enter a special character, please refer to the following content. DSP Settings - In the TTS input window, you cannot enter & or `. You can control the speaker's output volume and the microphone’s input volume. - You can enter ^ ( ) _ | ‘ “, but they are not converted to audio. - If @ # $ % = \ / * are located alone or in the middle of sentence or numbers, they will be converted to audio.
  • Page 46 using speaker mode ❖ For the IP audio module (SPA-D1000), the Equalizer menu is provided so that its sound can be properly Scheduler adjusted according to the characteristics of the connected analog speaker. A broadcast reservation can be set. The Equalizer menu is not provided as the DSP optimal value is reflected for each speaker model. Broadcast sound sources can be broadcast through the speaker alone by directly entering sound files (mp3, ~ Parametric Equalizer (PEQ) wav) registered in Source File Management or TTS phrases.
  • Page 47 Schedule Setting Screen 3. Repeat: Select a day, a period, etc. you want to set. It is a screen where you can set schedules. ~ Select Day: During the set dates, it runs only on selected days of the week. If you select days of the week, <Everyday>...
  • Page 48 using speaker mode ~ TTS: Enter sentences with the language to be used in the <Text for TTS> and select the language and ~ Repeat Option (Extension): Sets the set schedule to repeat on a weekly, monthly, or yearly basis. gender in Select Speaker.
  • Page 49 Holiday Setup Event SIP Management When it is connected to the VoIP phone which uses the standard SIP protocol and IP PBX server, the voice Click the [Holiday] button on the scheduler settings screen on the VoIP phone can be played on the speaker. and the <Holiday>...

  • Page 50: Maintenance

    using speaker mode 4. If you dial <User ID> on your VoIP phone and speak, it will be received by and played on the speaker. MAINTENANCE The <Status Detail> of the <User ID> account will display as "Running, Conversation," and if you hang up the phone, it will change to "Disconnected."...
  • Page 51 Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Hanwha Vision cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products.

This manual is also suitable for:

Spa-c100bSpa-c110bSpa-c110wSpa-w100bSpa-w100wSpa-h100b ... Show all

Table of Contents