Table of Contents
Advertisement
programmed twice.)
—Stand time appears in display window.
PACT ESL
Step 4. Touch Start Pad.
time counts down.
"E" Display in Window:
og
co
if 'E" appears in display window, it is an indication that an
error has been made while programming the oven.
Touch Reset/Stop Pad to clear previous entries.
If necessary, consult appropriate section of this manual
before re-programming oven.
Some examples.under which "E"' indicating ERROR, will
appear are:
eWhen clock is set for an impossible time such as 12:63 or
27:30, etc.
@When Defrost or Stand Time is selected after Convection
or Combination Cooking.
'When Defrost is selected with temperature probe
connected to oven ceiling receptacle.
eWhen more than one Convection or Combination
* Cooking program is selected.
oven in again.
Power Failure etc.:
When the oven is not being used for cooking the display
window will show the time of day.
If the oven is affected by a temporary power failure or the
plug is removed from electric outlet and then reinserted, the
display window will show the colon blinking automatically.
To reset correct time of day, simply follow the clock set
instructions.
Advertisement
Table of Contents
