edishine HOWL07F Instruction Manual

edishine HOWL07F Instruction Manual

Outdoor wall light

Advertisement

Quick Links

Outdoor Wall Light
SKU: HOWL07F
[Instruction Manual]
Please pay attention to the warning signs
Read the instructions with caution before operating
and keep it properly
V30815

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HOWL07F and is the answer not in the manual?

Questions and answers

Summary of Contents for edishine HOWL07F

  • Page 1 Outdoor Wall Light SKU: HOWL07F [Instruction Manual] Please pay attention to the warning signs Read the instructions with caution before operating and keep it properly V30815...
  • Page 2 WARNING: Risk of fire. Min 75°C supply conductors. Consult a qualified electrician to ensure correct installation.Before installation, please turn off the main power of the circuit breaker to prevent possible electric shock. Packing List Part Description Quantity Wall light 17.83"x6.3"x7.6" Wire connectors M4*25mm Mounting screw...
  • Page 3 FIG.3 FUSE BOX STEP 01: POWER OFF FIG.1. Turn the wall switch to the “OFF” position. Depending on which type of fuse box in your home: FIG.2. Either turn the main (Master) switch to the "OFF" position to cut off the power supply of the entire home, or turn off the individual switch that supplies power to the fixture installation location.
  • Page 4 STEP 05: POWER ON Turn on the main (Master) switch to get the power back, the light will turn on automatically. The lamp structure is described as following picture: bulb not included...
  • Page 5 Operation description 1.TEST mode Allows you to adjust the sensitivity of motion detector to a desired level at day or night. When motion stops,This light automatically turns off after approximately 5 seconds. 2.AUTO mode Motion detector turns your light on automatically after sensing moving heat sources in its coverage area at dusk, and stays on as long as motion is detected .When motion stops, light will.
  • Page 6 PARAMETER DESCRIPTIONS - Input Voltage: 120VAC 60HZ - Max load Power for Bulb : Incandescent Bulb 60W - Socket Type: Standard medium E26 ( bulb not included) - Material: Die-casting Aluminum and Glass - Function : Motion sensor - Dimensions: 17.83’’(H) x 6.3”(W) x 7.6”(D) - Comply with: ETL One Year Limited Warranty Supported by our professional R&D team and QC team, we provide One...

Table of Contents

Save PDF