Paging - Kenwood TM-241A Instruction Manual

5-10 PAGING
The paging function is available when the optional
DTMF unit (DTU-2) is installed.
The paging function is useful to call all stasions a group,
a specific station, or wait for a call from another station
by using DTMF(Duai Tone Multi Frequency signaling.
Example: When station 2 is called
F 2 145.660MHz
Your code : 111
/ \ Station2's code : 333
LEE iN
code
Display \
Plll po
Us 145.660MHz
333 _ Wi
Station2's Your code
LS POO
O00 Called me!
Fi: 145.660MHz va F > |45.660MHz
Individual code : 222 sade pace Individual code : 444
Station | ferences Station 3
Station 2
The common group code and individual codes should
be determined in advance. These codes should be from
000 to 999 (3 digits). Unlike DTSS, the code of the calling
station is displayed on the receiver, so the receiver can
identify the calling station.
When called by a local station, the individual code of
the calling station is displayed. When called with a
group code, that group code is displayed.
Paging operation procedure
Set your station code
]
Tune to frequency of the other station
| Enter the paging mode
To call the other To stand by fora
station pager
1
Set the code of
station to be called
!
Transmit
7 Call
Stand by
41