Toshiba SD-K531 User Manual

Other functions (VCR)

Duplicating a video tape

If you connect the DVD/VCR to another VCR or Camcorder, you can duplicate
a previously recorded tape. Make all connections before turning on the power.
Duplicating a video tape
Preparation:
• Turn ON the TV and select the corresponding video
input.
• Press VCR DVD selector to select the VCR mode.
(The VCR indicator will light.)
• Load a cassette tape with the erase prevention tab
intact.
• Load a previously recorded tape into the playback
VCR or Camcorder.
1
Press SP/SLP to select the desired tape speed
SP or SLP.
SP/SLP
It is recommended that you set the
PLAY MODE
tape speed to the SP mode on the
recording VCR for best results.
2
Press INPUT SELECT once or twice to select
AUDIO/VIDEO input position.
"L1" or "L2" will appear in the display.
INPUT SELECT
PROGESSIVE
L1: on the rear panel
L2: on the front panel
3
Press PLAY on the playback VCR or Camcorder.
4
Press REC/OTR on the recording VCR.
The duplicating process begins.
REC/OTR
5
Press STOP after duplicating a video tape.
STOP
40
J2D81701A (E)p38-41.p65 40
Connection with second VCR
Playback VCR
To VIDEO OUT
AUDIO/VIDEO cable (supplied)
Recording VCR
To AUDIO (R) IN
To VIDEO IN
To AUDIO (L) IN
Connection with Camcorder
Playback Camcorder
Recording VCR
To AUDIO (R) IN
To AUDIO (L) IN
AUDIO/VIDEO cable (not supplied)
To VIDEO IN
For duplicating a previously recorded tape from a
camcorder, follow the camcorder manufacturer's
instructions. A typical camcorder dubbing hookup is
shown above.
28/5/04, 1:40 PM
VCR DVD
2
1
4
5
To AUDIO (R) OUT
To AUDIO (L) OUT
To AV Jack