Table of Contents
Advertisement
4 Use your
soundbar
This section helps you use the soundbar to play
audio from connected devices.
Before you start
•
Make the necessary connections described in
the quick start guide or the user manual.
•
Switch the soundbar to the correct source
for other devices.
Power on/off
Connect the soundbar to the power supply, and
the red standby indicator lights up.
Press
to power on the soundbar.
The soundbar's indicator lights up white, and
then will show the status of the last selected
source. Press again to switch the soundbar to
standby.
Standby: The indicator is solid red.
Volume control
Press +/- (Volume) to increase or decrease the
volume level.
•
To mute sound, press
control.
•
To restore the sound, press
press +/- (Volume).
Indicator status
Decrease /Increase volume/Mute: Blinking
red.
Maximum/Minimum volume: Solid red for
three seconds.
When you press + (Volume) to increase
•
the volume, the soundbar's indicator will
blink red, and the volume will return to the
normal state. The soundbar's indicator will
show solid red for three seconds when the
volume reaches the maximum.
When you press - (Volume) to decrease
•
the volume, the soundbar's indicator will
blink red, and the volume will return to the
normal state. The soundbar's indicator will
show solid red for three seconds when the
volume reaches the minimum.
on the remote
again or
Source selection
Press
on the soundbar repeatedly or the
corresponding buttons (BT/PAIR, AUX, HDMI
(ARC), OPTICAL) on the remote control to
switch between different sources.
A
UX IN: Solid green
Bluetooth-pairing: Blinking blue
Bluetooth-connected: Solid blue
OPTICAL: Solid yellow
DMI (ARC)
Solid purple
H
:
EQ setting
Press EQ on the remote control to select Music,
Movie, News or Stadium mode.
• Music: Soundbar's indicator blinks white
for 3 seconds.
• Movie: Soundbar's indicator blinks
green for 3 seconds.
• News: Soundbar's indicator blinks red
for 3 seconds.
• Stadium: Soundbar's indicator blinks
cyan for 3 seconds.
AUX audio source
You can play audio from an external device
(smart phone, tablet, etc.) via a 3.5mm audio
cable.
1
Connect the external device to your
soundbar via the 3.5 mm stereo audio cable
(not included). Refer to Page 8 for steps of
AUX connection.
2
Press AUX on the remote control.
The soundbar's indicator turns solid
green.
3
Play audio on the external device (refer to
the user manual of the device).
Optical audio source
You can play audio from a TV via an optical cable.
1
Connect the TV to your soundbar via the
optical cable (not included). Refer to Page
7 for steps of OPTICAL connection.
2
Press OPTICAL on the remote control.
EN
9
Advertisement
Table of Contents
