Auto Clock Set - Panasonic AG-513E Operating Instructions Manual

Initial Setup (continued)
Setup Channel and Auto Clock Set (TUNER:ON only)
Press CH A or CH V to display CHANNEL/CLOCK AUTO SET screen .
« If you use a cable box, turn it on and select PBS channel in your time zone.
* CH AUTO SET COMPLETED
4 PLEASE PRESS CH UP KEY
Auto Clock Set
Auto Clock Set is performed only when Channel Auto Set is completed in above steps.
1 Press ACTION to display MAIN MENU.
2 MAIN MENU 1) Press AV to select "CLOCK."
E:
e| | 2) Press ACTION to display SET CLOCK screen.
x =
SELECT :a ¥ 4%
SET :ACTION
SET CLOCK 1) Press AV to select "AUTO CLOCK SET," then
press b.
TIVE zone aowust so | 2) Press CHA to start.
EU * |f Channel Auto Set is not performed, "CH AUTO SET
ENO — :ACTION PROCEEDING" appears.
» "AUTO CLOCK SET PROCEEDING" appears.
Setup completed
Press CH A to exit.
2/ 1/2001 WED 12:00PM | . if your area observes
SETTING : CH 10
daylight saving time, but
AUTO CLOCK SET
AUTO CLOCK SET
ou would like to turn the
1S INCOMPLETE
ST feature off, set
Ward DST : OFF (see "Clock" PLEASE SET CLOCK BY
END : PRESS CH UP KEY on pages 12 and 13). PRESSING ACTION KEY
+ If time is not correct...
See next page.
even though your area observes daylight
saving time and DST is set to ON, do
*Time Zone Adjust" steps on page 13.
IMPORTANT NOTE FOR AUTO CLOCK SET
* If using a DSS receiver, it must be turned off for auto clock set.
- if for any reason the time is changed manually, automatic time correction will not occur.