Related Manuals for atomi smart AT2003
Summary of Contents for atomi smart AT2003
- Page 1 Smart WiFi Indoor Ceiling Fan AT2003 Let’s get started! Quick Start Guide v1.05/23...
-
Page 2: For Your Safety
FOR YOUR SAFETY WHAT’S IN THE BOX READ AND SAVE ALL INSTRUCTIONS BEFORE USING. WARNING To reduce the risk of personal injury, do not bend the blade brackets when installing the brackets, balancing the blades, or cleaning the fan. Do not insert foreign objects in between rotating fan blades. 2. -
Page 3: Tools Needed For Installation
Unpack and inspect the fan carefully to confirm that all parts are included. Outlet Box Flush Mounting Standard Mounting Pre-assembled. The Atomi Smart Ceiling Fan comes already prepped for this installation option. Angled ceiling maximum 16° angle Ceiling Outlet Box Ceiling Outlet Box 12”... -
Page 4: Installing The Blades
FOR THIS STEP YOU WILL NEED FOR THIS STEP YOU WILL NEED INSTALLING THE BLADES ASSEMBLING THE LIGHT FIXTURE One at a time, insert each blade into the slot on the fan structure. Secure each blade with the screws and washers found in Bag A1. Using a screwdriver detach the three parts that come together: the light ring, the LED board, and the LED board cover. -
Page 5: Installing The Brackets
LED board. INSTALLING THE BRACKETS Only use the provided Atomi Smart ceiling bracket that comes with your fan. Remove any existing brackets from your ceiling prior to installation. Secure the bracket to a ceiling box that is acceptable for fan support of 32kg (70lbs). - Page 6 This step is for Standard and Angled Mounting only. For the Flush Mounting (pre-assembled) please go to Step 5. If you have a longer downrod from Atomi Smart, please, follow the same instructions. PREVENT FAN FALLING INJURY OR DEATH: • ALWAYS tighten screws with a screwdriver or a drill.
- Page 7 Remove the clip and pin from the new downrod. Tighten the screws. Slide down the funnel. Insert the canopy and funnel Hold the canopy and funnel up to Re-attach the wires to the wire splitter, matching the colors. Plug the red and blue wires. into the downrod, passing all insert the pin and clip back in place.
-
Page 8: Hanging The Fan
FOR THIS STEP YOU WILL NEED HANGING THE FAN WIRING THE FAN Lift and carefully hang the fan on the mounting bracket. Carefully follow these steps to get your fan wired safely and quickly. If you are unfamiliar with wiring or uncomfortable doing it yourself, please contact a qualified electrician. THE CEILING FAN MUST BE GROUNDED. -
Page 9: Installing The Canopy
FOR THIS STEP YOU WILL NEED Push the bare metal ends of the wires together and slide a wire nut over them. Twist the wire nut clockwise until tight. Give it a gentle pull to ensure none of the wires come apart. INSTALLING THE CANOPY Connect the BLACK Connect the WHITE (W) -
Page 10: Installing The Glass Shade
(See page 7). Turn on the circuit breakers to the outlet box associated with the wall switch or go to https:/ /atomismart.com/app/ location, then turn on the wall switch and check if the Atomi Smart WiFi Get the app Register Ceiling Fan has 100% of white light brightness. -
Page 11: Using The Remote Control
Change Light to Blue WiFi RGB + Password Continue Connect your 2.4GHz WiFi network* Enter or select your local WiFi name, enter your password, then press “Continue”. *Make sure you’re connected to a 2.4GHz WiFi network (Atomi Smart can’t connect to 5GHz networks). - Page 12 FOR THIS STEP YOU WILL NEED Attaching to an existing light switch Note: This is only compatible with toggle switches. Remove the screws from USING THE BALANCE KIT Place the remote control mount Slide the remote control your light switch cover over the cover and attach it with holder in place, then insert (Do not remove the cover).
-
Page 13: Troubleshooting
2, please repeat steps 1 and 2. - Ensure the batteries are installed correctly with Smart device. If not, move your Atomi Smart device and check the fan’s wiring for any connection regard of polarity (+ and -). - Page 14 8. Promo code is not exchangeable for cash. 4. Customers can only use the promo code once. 9. Atomi Smart will not be liable and/or be required to offer For questions or concerns, email us at support@atomiusa.com 5. Atomi Smart reserves the right to cancel or modify any replacement codes, discounts, credits, cash or otherwise Manufactured and marketed by Atomi Inc.
Need help?
Do you have a question about the AT2003 and is the answer not in the manual?
Questions and answers