6
ASSEMBLE COMPONENTS
Notice
Read the safety guidelines, which are included in the delivery. Follow them strictly to ensure
safety and a high-performance LED system!
6.1
Install Mounting bars for Wall Mounting
This section is a guide to the mounting of the Mounting bar and describes the following in more
detail:
Prepare the support structure according to the installation site requirements.
Prepare the wall for installation.
Then fix the structure on its designated place according to the static requirements.
Table 6: Mounting bar – Installation requirements
No. of People 2
Tools
Ladder/ elevated working platform
Tools for mounting (e.g. hammer,
screwdriver, Allen key, jaw spanner)
Drilling equipment (e.g. drilling machine
and fitting attachment/head)
Mounting material (screws, dowels etc.)
Measurement tools (e.g. rule, spirit level)
Alignment bar
Equipment
See for 3.3 Framesets for Bundles specifications related to:
Frameset for LED-FA012i2-110 and LED-FA019i2-110 (4×4 Modules)
Frameset for LED-FA015i2-137 (5×5 Modules)
Frameset for LED-FA019i2-165 (6×6 Modules)
Frameset for LED-FA012i2-220 and LED-FA025i2-220, LED-FA038i2-220
(8×8 Modules)
6.1.1
Prepare the Wall Surface
Remove debris and clean the wall surface.
Measure the dimensions for the bundle according to wall frame specifications for the target
frameset: 4×4, 5×5, 6×6, 8x8.
Notice
Ensure proper ventilation of the LED Wall. For more information, see 3.6 Ventilation
Requirements.
Consider the cable plans, see 15.1 Cable Plans and ensure the cables can be placed properly.
depending on mounting surface,
wall material/condition
depending on
overall weight of chosen screen
system
mounting surface, wall
material/condition
Included in delivery, flat black bar
41