Advertisement
Wall Bracket Installation for
Concrete Walls
REQUIRED TOOLS (NOT INCLUDED)
1. Stud finder
2. Screwdriver
MOUNTING THE WALL BRACKET
1. Use a power line/ metal detector to verify the installation
area has no pipes or power lines beneath the surface. Hold
the wall bracket against the installation surface. Use a level to
ensure that the placement of the wall bracket is horizontal.
Use a pencil to mark the screw holes in the wall bracket onto
the surface.
2. Drill the holes into the installation surface.
3. Insert the wall anchors into the holes.
3. Pencil
4. Ø5/16" (8 mm) drill bit
4. Firmly mount the mount holder using the provided screws.
Wall Bracket Installation for Drywall or
Unfinished Walls
REQUIRED TOOLS (NOT INCLUDED)
1. Level
2. Pencil
3. Stud finder
CAUTION: It is preferred to mount to a stud.
MOUNTING THE WALL BRACKET
1. Use a stud finder to locate the center of a wall stud. Use a
level and a pencil to draw a vertical line down the center of
the wall stud.
2. Hold the wall bracket against the installation surface. Align
the vertical line to the holes of the wall bracket. Firmly mount
the wall bracket using the provided screws.
4
4. Screwdriver
5. Ø5/16" (8 mm) drill bit
Advertisement
