Table of Contents
Advertisement
English
Using Direct Kill to Kill Your Own Radio
Direct Kill allows you to make your own radio inoperable.
Press and hold the Top Side button then press the
Orange button until the display turns blank and
becomes inoperable.
Radio Inhibit
This feature allows the system administrator to put a radio
into a non-functional state when the radio is missing or in
an unknown hand. The radio stays in this state regardless
of power changes, for example, battery removal.
NOTICE:
If the radio has Inter-system roaming capability, the
system administrator is able to put the radio into a
non-functional state when missing radio roamed to
another system.
The radio can only be uninhibited by receiving an
uninhibit command from the system administrator or
reprogram the radio through labtool or depot CPS
only.
146
Global Positioning System/Global
Navigation Satellite System
The Global Navigation System (GNSS) in the radio
integrated the information from the Global Positioning
System (GPS) and Global Navigation Satellite System
(GLONASS) to determine the approximate geographical
location of your radio. The geographical location is
expressed as latitude and longitude or Military Grid
Reference System (MGRS) format per request from
customers.
NOTICE:
This feature is addressed as GPS across the
manual as the naming convention of the buttons
and strings remain the same as the legacy feature
of GPS.
The availability and accuracy of this location information
(and the amount of time that it takes to calculate it) varies
depending on the environment in which you are using the
GPS feature.
For example, GPS location fixes are difficult to obtain
indoors, in covered locations, between high buildings, or in
situations where you have not established a clear broad
view of the sky.
Advertisement
Table of Contents
