Godox UL150 - SILENT LED Video Light Manual

Also See for UL150:

Instruction manual (8 pages)

Table of Contents

Contents

1 Foreword
2 Body
3 Controller
4 Power Supply
5 Operation
6 Technical Data
7 IMPORTANT SAFETY INSTRUCTIONS
8 Documents / Resources
- 8.1 References
- 8.2 Download manual

Godox UL150 - SILENT LED Video Light Manual

Foreword

Silent LED Video Light UL series are suitable for live recording, video shooting and photojournalistic shooting for they have no fan and won't make noise. UL series are very convenient due to the separation design of main body, adapter and controller. UL series create stable light resource and even illumination for photography. With an included remote control and easy operation, UL series LED lights can be adjusted its light brightness in separate groups.

Main Features:

With strong power, stable light source and adjustable light brightness
Powered by V-port Lithium battery or DC power supply with wide application
Adapter and controller are separate from the main light body, which offers more convenient operation and better heat dissipation
Smartphone APP through Bluetooth
With U-type bracket to adjust different angles easily
Bowens-mount enables to install various of accessories

Body

Body Overview

Light Body
Thermovent
Bowens Mount
Protect Cover

LED Light
Umbrella Input
Locking Ring
U-type Bracket

Bracket Locking Ring
Bracket Sleeve
Handle

Power Input Socket
Accessory Locking Button

Controller

Controller Overview

Included Items

LED video light
Reflector for Bowens mount LED light
Power cord

Adapter
Lamp cover
Connect cord
Fastener
Controller

Instruction manual

Power Supply

Firstly, plug the two ends of connect cord separately into the controller's output control port and the light's power input socket. A "click" will be heard once finished.
Plug the output end of adapter's connect cord into controller's power input end.
Use the power cord to connect the power supply.

Note: If using V-port battery, please insert the battery into the LED light and power it on for usage.

Operation

Power on/off: long press the Power Switch of controller to power the LED light on or off.
Choose group/channel: press GR/CH button for once, and turn the Select Dial for Light Brightness to change the channel value. Then, press GR/CH button again, and turn the Select Dial for Light Brightness to change the group value (the group figure will be displayed recurrently). Press GR/CH button to exit.
Light brightness adjustment: turn the select dial for light brightness to change the value from 0% to 100%.

Overheat Warning
Over heat occurs when the HP appeared on the controller's display and blinked on the display. It is recommended to turn off the light and cool it down before reuse to avoid destroying the light beads.

Wireless Control
(Smartphone APP through Bluetooth)
Godox UL series LED lights can also be controlled by smartphone APP through Bluetooth with 6 groups and 16 channel.

Bluetooth connection: power the LED light on and long press the GR/CH button until a Bluetooth ID is displayed on the controller. Then, open the "GodoxPhoto"APP, click the Bluetooth and choose the corresponding Bluetooth ID of the controller. Finally, enter the password (the initial password is "000000"), and the Bluetooth is successfully connected.
Note: The channels and groups of LED controller and APP should be adjusted to the same.
LED control: please find more details in the "GodoxPhoto" APP of smartphone: Setting---Help---LED.

Technical Data

Silent LED Video Light		UL150
Power Supply	DC Power supply	AC100V-240V(50/60HZ)/2A(DC16.8V 10A)
	Lithium battery	V-port battery(separately sold)
Power		150W
Color Temperature		5600±200K
100% Light Brightness (LUX, 1m)(≈)		58000
CRI (≈)		96
TLCI (≈)		97
Light Brightness Range		0%-100%
Operation Temperature		-10°C~40°C
Channel		16
Group		6 groups (A, B, C, D, E, F)
BT Frequency Range		2402.0-2480.0MHz
Max. Transmitting Power		5dbm
Dimension		316.9217.8170mm
Net Weight		Light: 3.09Kg Controller: 0.86Kg Adapter: 0.72Kg

Note: The illumination value will be different when changing different accessories.

IMPORTANT SAFETY INSTRUCTIONS

When using your photographic equipment, basic safety precautions should always be followed, including the following:

Read and understand all instructions before using.
Close supervision is necessary when any appliance is used by or near children. Do not leave appliance unattended while in use.
Care must be taken as burns can occur from touching hot parts.
The appliance switch is provided with the symbols 0 indicating off and 1 indicating on. The symbols and may be used for this purpose.
Do not operate appliance with a damaged cord or if the appliance has been dropped or damaged – until it has been examined by a qualified serviceman.
Position the cord so that it will not be tripped over, pulled, or contact hot surfaces.
If an extension cord is necessary, a cord with a current rating at least equal to that of the appliance should be used. Cords rated for less amperage than the appliance may overheat.
Always unplug appliance from electrical outlet before cleaning and servicing and when not in use. Never yank cord to pull plug from outlet. Grasp plug and pull to disconnect.
Let appliance cool completely before putting away. Loop cord loosely around appliance when storing.
To reduce the risk of electric shock, do not immerse this appliance in water or other liquids.
To reduce the risk of electric shock, do not disassemble this appliance, but take it to a qualified serviceman when service or repair work is required. Incorrect reassembly can cause electric shock when the appliance is used subsequently.
The use of an accessory attachment not recommended by the manufacturer may cause a risk of fire, electric shock, or injury to persons.
Connect this appliance to a grounded outlet.
Disconnect this unit from its source of supply before replacing the projection lamp.

SAVE THESE INSTRUCTIONS

GODOX Photo Equipment Co., Ltd.
Add: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao'an District, Shenzhen, China
Tel: +86-755-29609320(8062)
Fax: +86-755-25723423
E-mail: godox@godox.com
godox.com