Table of Contents
Advertisement
USE HANDHOLDS AND STEPS
Falling is one of the major causes of personal injury.
•
When you get on and off the machine, always
face the machine and maintain a three-point
contact with the steps and handrails.
•
Do not use any controls as hand-holds.
•
Never jump on or off the machine. Never mount or
dismount a moving machine.
•
Be careful of slippery conditions on platforms,
steps, and handrails when leaving the machine.
ADJUST THE OPERATOR'S SEAT
A poorly adjusted seat for either the operator or for
the work at hand may quickly fatigue the operator
leading to mis-operations.
•
The seat should be adjusted whenever changing
the operator for the machine.
•
The operator should be able to fully depress the
pedals and to correctly operate the control levers
with his back against the seat back.
•
If not, move the seat forward or backward, and
check again.
•
Adjust the rear view mirror position so that the
best rear visibility is obtained from the operator's
seat. If the mirror is broken, immediately replace it
with a new one.
SAFETY
008-E01A-0439
009-E01A-0462
SA-6
Find manuals at https://best-manuals.com
SA-439
SA-462
Advertisement
Table of Contents
