Aqara TVOC Air Quality Monitor - Manual

Product Introduction

The Aqara TVOC Air Quality Monitor can detect the concentration and level of TVOC in the air, as well as temperature and humidity. After it is bound with a hub, it can use TVOC concentration or level, temperature, and humidity changes as conditions of automation, work with other smart home devices to implement various smart scenarios, and send notifications to your mobile phone.

*TVOC: Total Volatile Organic Compounds, organic compounds whose saturated vapor pressure exceeds 133.32 Pa at room temperature. Its boiling point is between 50°C and 250°C. It can evaporate in the air at room temperature. Its toxicity, irritation, carcinogenicity and smell will affect the skin and mucous membranes and cause acute damage to the human body.
*An Aqara Zigbee 3.0 Hub is required. Some functions require specific models of hubs. See www.aqara.com/support for more details.

Quick Setup

Add Device

1. Before activating the accessory, please make sure you have the Aqara Home app downloaded and the Aqara Hub installed.
2. Please open the app, tap "Home" and then tap "+" in the top right corner to enter the "Add Device (Accessory)" page. Select "TVOC Air Quality Monitor" and add it according to instructions in the Aqara Home app.
3. Please see www.aqara.com/support for more support.

* If adding fails, please move the hub closer to the product and try again.

Network Icon (Sensor Display)

"Searching for network"icon:
"Connected to network"icon:

The network icon will not be displayed when the device is offline and not in the searching state.

Page Switching

Double click the sensor button to switch between multiple pages.

Installation Method

Effective Range Test: After it is bound with the hub, put the device at the preferred installation location and click the reset button of the device. If the hub makes voice prompts, it indicates that the accessory can communicate effectively with the hub.

Method 1: Place it directly on the desktop or other preferred places without adhesive.

Method 2: Paste on a preferred place with adhesive.

* Please make sure the surface of the pasting location is clean and dry.

Method 3: Paste on the surface of steel materials with a magnetic sticker.

Specifications

Model: AAQS-S01
Dimensions: 41.6 × 76.0 × 14 mm(1.64 × 2.99 × 0.55 inch)
Wireless Protocol: Zigbee 3.0
Battery Model: CR2450 × 2
Operating Temperature: 0℃ ~ +50℃
Operating Humidity: 0~95% RH, no condensation
TVOC Detection Range: 0~25mg/m3
Temperature Detection Rage: 0 ~ 50℃
Humidity Detection Range: 0 ~ 100% RH
Zigbee Operation Frequency: 2405-2480 MHz Zigbee Maximum Output Power ≤ 13 dBm

Warnings

1. This product is not a toy, please keep children away from this product.
2. This product is designed for indoor use only.
3. Do not place this product near a heat source.
4. Do not attempt to repair the product by yourself. All repairs should be performed by authorized personnel.
5. This product is designed only for improving the convenience of household life, and for status notifications. If the user violates the product instructions and this warning, the manufacturer is not responsible for any risks and property losses caused thereby.

Online Customer Service: www.aqara.com/support
Email: support@aqara.com
Manufacturer: Lumi United Technology Co., Ltd.
Address: 8th Floor, JinQi Wisdom Valley, No.1 Tangling Road, Liuxian Ave, Taoyuan Residential District, Nanshan District, Shenzhen, China