POSIFLEX XT-4015 User Manual

POSIFLEX XT-4015 User Manual

Fan lcd touch terminal

Advertisement

Quick Links

XT– 4015
Fan LCD Touch Terminal
User's Manual
Rev.: Original
FCC Notes:
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions manual, may cause interference
to radio communications. It has been tested and found to comply with limits for a Class
A digital device pursuant to subpart J of Part 15 of FCC Rules, which are designed to
provide reasonable protection against interference when operated in a commercial
l environment. Operation of this equipment in a residential area is likely to cause
interference in which case the user at his own expense will be required to take whatever
measures to correct the interference.
Warranty Limits:
Warranty terminates automatically when any person other than the authorized
technicians opens the machine. The user should consult his/her dealer for the problem
happened. Warranty voids if the user does not follow the instructions in application of
this merchandise. The manufacturer is by no means responsible for any damage or
hazard caused by improper application.
About This Manual:
Posiflex has made every effort for the accuracy of the content in this manual. However,
Posiflex Technology, Inc. will assume no liability for any technical inaccuracies or
editorial or other errors or omissions contained herein, nor for direct, indirect,
incidental, consequential or otherwise damages, including without limitation loss of
data or profits, resulting from the furnishing, performance, or use of this material.
This information is provided "as is" and Posiflex Technology, Inc. expressly disclaims
any warranties, expressed, implied or statutory, including without limitation implied
warranties of merchantability or fitness for particular purpose, good title and against
infringement.
The information in this manual contains only essential hardware concerns for general
user and is subject to change without notice. Posiflex Technology, Inc. reserves the
right to alter product designs, layouts or drivers without notification. The system
integrator shall provide applicative notices and arrangement for special options utilizing
this product. The user may find the most up to date information of the hardware from:
http://www.posiflex.com or http://www.posiflex.com.tw or http://www.posiflexusa.com
All data should be backed-up prior to the installation of any drive unit or storage
peripheral. Posiflex will not be responsible for any loss of data resulting from the use,
disuse or misuse of this or any other Posiflex product.
All rights are strictly reserved. No part of this documentation may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic,
mechanical, photocopying, or otherwise, without prior express written consent from
Posiflex Technology, Inc. the publisher of this documentation.
© Copyright Posiflex Technology, Inc. 2013
All brand and product names and trademarks are the property of their respective holders.
16670900010
P/N:
Part 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XT-4015 and is the answer not in the manual?

Questions and answers

Summary of Contents for POSIFLEX XT-4015

  • Page 1 About This Manual: Posiflex has made every effort for the accuracy of the content in this manual. However, Posiflex Technology, Inc. will assume no liability for any technical inaccuracies or editorial or other errors or omissions contained herein, nor for direct, indirect, incidental, consequential or otherwise damages, including without limitation loss of data or profits, resulting from the furnishing, performance, or use of this material.
  • Page 2 ALERT TO OUR HONORABLE CUSTOMERS: Please always read thoroughly all the instructions and documents delivered with the product before you do anything about it. Don’t take any premature action before you have a full understanding of the consequences. This product contains inside a Lithium battery. Please always follow local environmental protection laws / regulations for disposal of used batteries and always replace only with battery of same type.
  • Page 3 INTRODUCTION PRODUCT PICTURES FOR Gen 7&8 BASE STAND Gen 7 Base Front View Rear View Gen 8 Base Front View Side View Inside touch open door Part 3...
  • Page 4: Parts Identification

    Gen 7 Base Base Stand and Bottom View Gen 8 Base Base Stand and Bottom View PARTS IDENTIFICATION Main Unit LCD touch panel Power indicator Gen 7 base stand Hinge for LCD terminal HDD cover Power switch Brightness adjust digital push button “+” Brightness adjust digital push button “-”...
  • Page 5: Product Features

    14. Fan Ventilation 15. Bottom plate 16. Rubber feet with bottom plate fixing screw 17. 2 HDD cover 18. Base cover I/O Plate View A) 1x Line out B) 4x USB ports C) 1x VGA port (D-sub, 15 PIN) D) LAN2 port E) LAN1 port F) COM1 (DB9) port G) COM2 (DB9) port...
  • Page 6 in main unit. An advanced slim base design that supports storage room for optional g ) g ) g ) g ) 2.5” HDD. Support Windows XP Pro / WEPOS / POSReady / Win 7 / Linux. h ) h ) h ) h ) High quality 15”...
  • Page 7: Opening Cable Cover

    Optional Items: Note: The underlined items in the following list means that option must be set prior to shipment from the factory. The rest of items can be set by the dealers. DDR3 SODIMM memory expansions up to 16GB max in two SODIMM.
  • Page 8 DISCONNECTING ALL CABLES After removal of the cable cover, the connector area will be accessible then. Please first note orientations of every existing cable connection and then disconnect every cable properly before separating the main unit from the adjustable stand assembly. Please note that the click lock spring has to be pressed down prior to pulling out the connector such as the LAN port or the CR port or the alternate RJ45 form COM4 port.
  • Page 9: Base Mount Upgrade Kit

    Note: XT-4015 series is equipped with a standard 120W power adapor . CONNECTING CASH DRAWER The RJ11 connector in I/O area of a XT-4015 system can be used for controlling most of the common cash drawers available on the market.
  • Page 10: Connecting Cables

    PC veterans to accomplish such a task. Therefore, OS installation into a system without preloaded OS is highly discouraged. Posiflex Technology, Inc. shall not be responsible for any technical support to questions on this aspect.
  • Page 11: Power On/Off

    and humidity/moisture. (Operating range 0°C to 40°C and up to 80% humidity – non condensing, max. wet bulb 26°C) POWER ON/OFF Touch Open Cover Please refer to the previous chapter PRODUCT PICTURE during this part in order to find out the buttons. A gentle tap on the touch open cover at left side of the main unit will open the cover and show the power switch at top area.
  • Page 12 XT-4015 may enable user to remotely power up/off, monitor, access or secure PCs. Coupled with on-board Q67 chipset compatible with Intel vPro i5/i7 CPU with enabled AMT functionality, XT-4015 makes it that user can mange remote PCs by accessing available BIOS menu. Please follow steps below to configure AMT feature.
  • Page 13: Brightness Control

    Note: 1) Intel is a registered trademark of Intel Corporation. 2) Intel MEBX displays deleted options only if one of more of these options does not appear, ensure that the system supports itself with relevant missing features. Automatic Power on Control The XT system may also turn on according to some preset conditions such as Alarm Clock Wake Up or LAN Wake Up.
  • Page 14: Display Issues

    SERIAL PORTS – COM1/2/3/4 In XT-4015 system, there are 3 serial ports in form of DB 9 pin male connectors and 1 in form of 10 pin RJ45 type modular connector available. DB 9 serial ports can supply a +5 V and +12V DC after proper BIOS and jumper setup.
  • Page 15 Manager is already installed on your system. Nevertheless, you can also download the Manager from our website: Visit us at http://www.posiflex.com, and click Support on the main menu bar. On Support page, click Download on the left to access Download page.

Table of Contents