Garmin GPS II Mount Instructions

Dash Mount Instructions
Standard Parts:
u
Bracket
0)
Pivot Base (1)
Velcro (2)
3mm
Locking Knob (2)
1. Insert the GPS unit into the bracket:
A. Mate the two clips at the bottom of the
bracket with the notches in the bottom
of the GPS unit. Snap the clips at the top
of the bracket into the notches in the
top of the unit by pressing firmly.
B. (Optional) Use the 3mm locking knob
to
secure the bracket to the back of the GPS
unit for added security in rough terrain.
(Fig. 1) (Note: Use only the knobs sup-
plied with the mount. Using incorrect
hardware may damage your mount.)
2. Remove the GPS unit from the bracket:
Unscrew the locking knob if necessary.
Press the top of the bracket outward and
flex it to release the clips from the unit.
Fig. 1