Kingslim D4 PRO - Dash Cam Manual

User Agreement

By purchasing Kingslim dash cams, you agree to Kingslim's terms and conditions, which include precautions, user warnings, and warranty coverage. If you do not agree to any of these terms mentioned in this manual for any reason, you may return the product unused and in its original packaging within the stated return window for a full refund.

1. To prevent external or internal damage, never expose this dash cam to rain, moisture, or water under any circumstances.
2. This device is not designed to be damp-proof, so avoid placing it in damp environments. Also, please refrain from opening the cover or attempting to repair the product yourself. Instead, contact us for assistance if there are any problems with accessories.
3. This camera is intended for use inside your vehicle only. Do not install it in locations that obstruct the driver's view of the road, such as mirrors or airbag deployment zones.
4. Please read this manual carefully before using or installing the camera, and keep it for future reference. It can help answer any questions or address any difficulties you may encounter while using this product.

Precautions

Please read and understand all the instructions before using this product. If any damage is caused by failure to follow the instructions, the warranty will be voided.

Warnings

1. Please take note of safety warnings and regulations as failure to comply may result in serious injury or death.
2. Avoid placing the camera on top of the instrument panel or in front of the airbag as it may fall and cause harm.
3. Do not mount the camera anywhere on the windshield that may loosen or distract you while driving.
4. Refrain from exposing the device to extreme heat or dust, and avoid using any chemical substances or cleaning solvents to clean it.
5. When cleaning the lens, be careful and use a soft, moist cloth to prevent scratches that can compromise video quality.
6. We recommend removing the camera from your vehicle when not in use to prevent theft or damage from exposure to extreme heat.
7. Operating or installing the camera while driving or making any adjustments is strictly prohibited; please pull over first and do so only when it is safe.
8. Please handle the camera with care and refrain from dropping, puncturing, or disassembling it.
9. If the car charger cord is broken or damaged, do not use it.
10. Keep this product out of reach of children, and avoid exposing it to direct sunlight for extended periods or temperatures exceeding 158°F (70°C).
11. Please note that some countries or states in the United States prohibit drivers from mounting anything on certain areas of the windshield, and it is the responsibility of the owner or operator to comply with local laws when mounting or using this device.
12. Lastly, please be advised that the company is not liable for any loss of data or content during operation or under any circumstances.

Overheated Camera

Dash cams are electronic devices that contain various components, including a processor, memory, camera lens, and other circuitry. When it's in use, it generates heat due to the power consumption and operation of these components. The heat generated during operation can cause the camera to heat up. Rest assured that our dash cams are equipped with radiators and vents to dissipate heat, and they operate within a temperature range of of -4°F (-20°C) to 149°F (65°C). The dash cam can still work normally though it heats up. We recommend you turn on the air conditioning to dispel the heat inside your car before using your camera. Besides, we suggest parking your car in a location that allows for sufficient air and protects your dash cam from direct sunlight or extreme temperatures.

First Use

Please read and understand warnings & safety instructions before operating.

Insert memory card

To record videos, you need to insert a memory card, and complete the formatting process. We recommend you use a Class 10 U3 or higher memory card of well-known brands at a maximum of 256GB.

Kind reminder:

1. Please format the memory card on the computer and then in the camera's settings for better compatibility.
2. We recommend you format the memory card every two months for better performance. Reformatting will erase all data on the SD card, so make sure you have backed up all your important files before formatting.

First-Time Charging

To begin using your dash cam, please plug it in. The camera will turn on automatically as soon as it receives power and prompt you to complete the initial setup on the screen for first-time use. It's important to keep your camera plugged into power at all times since the internal battery is only for emergency recording during parking mode.

Warm tips:

1. You can use your iPhone or Android phone's USB charger to plug your dash cam into a 110V power outlet.
2. If you don't get the initial setup prompts for any reason, please reset your camera, then restart it for the initial setup.

Settings

By default, all settings are pre-set so that you can start using the camera right away without any additional adjustments. However, you can customize it further by learning more about the camera by either watching How to Video on Youtube or reading the User Manual so you can get the maximum benefit out of it and the best user experience.

Recording

KINGSLIM 4K D4Pro dash cam is programmed to turn on and start recording automatically when it receives power. It will also start recording after you finish changing settings. To pause recording, simply press the button . When unplugged, this dash cam will also automatically stop recording, safely save the last video, and shut down within 5 seconds.

Setting time zone

Before using this dash cam, please manually set the time zone according to your location. To do this, please press the Settings button to enter the Setup screen, then navigate to "Time Zone Setting", and then press the OK button to complete the setting. When the GPS is functioning properly, the dash cam's date and time will automatically synchronize with your local time. You can also manually set the date and time by accessing the setup menu.

How to hide power cable inside your car's dash board?
Many people on YouTube already demonstrated how and where to hide the power cable inside your car. You can view one of the possible ways by visiting the link attached: https://www.youtube.com/watch?v=CZYaV5Dh4ok. (Note: The video is NOT recorded by us).

How to transfer videos to PC/MAC?

To transfer videos to your PC/MAC, first, you can either insert the memory card into your PC/MAC with a card reader, or connect your camera to the PC/MAC with a USB data cable. Then, select the option to connect as "USB Storage" when the message pops up. Your PC or MAC will then recognize the memory card. Please follow the prompts to find the memory card drive on your PC or MAC, you will be able to see all video or photo files in the memory card.

Wifi

To connect the KINGSLIM D4 Pro dash cam to your smartphone, you can utilize its built-in Wifi feature. Please note that once your phone connects to the camera's Wifi, its 4G signal will be temporarily blocked but will automatically restore after disconnection. It is advisable to exit the Kingslim APP or manually disconnect the camera's Wifi when you no longer require a connection between the camera and your phone. For more details about how to connect your camera to the app, please consult the section Use the Kingslim APP→Connect to the Kingslim APP.

Camera specifications

What's in the Box

Camera Overview

Getting Started

Memory card use

To record videos, you need a compatible memory card (sold separately). We recommend you use a Samsung/Sandisk/Kingston Class 10 U3 or high memory card for your D4 Pro dash cam. This dash cam supports a memory card of up to 256GB.

Warm tips:

1. To make your memory card more compatible with the dash cam, please format it on your computer first and then in the camera settings before using it.
2. Do not remove or insert the memory card when the dash cam is turned on as this may cause damage to your card.
3. You need to complete the formatting process each time you insert the memory card.

Insert the memory card

Before inserting the memory card, please ensure that the camera is turned off. Insert the card halfway into the slot, then use your finger or fingernail to push the card all the way in until you hear a click indicating that it has locked into place.

Remove the memory card

If you want to remove the memory card, gently push its edge inward until it clicks, then pops out, and then simply pull it out of the slot.

Format the memory card

Format the memory card on the computer
We recommend you format your memory card on a computer first for better compatibility. The following instructions are for your reference only.

Format the memory card in the camera
Before recording videos, please format the memory card in the camera by accessing the Setup screen. In case you have not yet done so, an error message will appear prompting you to insert the memory card. Please follow the instructions below to format the memory card.

1. To format the memory card, first make sure the dash cam is turned on, then press the Settings button to access the system settings screen.
   
2. On the settings screen, press the Down button till you find the "Format SD" option, then press the OK button to enter the formatting screen.
   
3. On the formatting screen, press the OK button again to confirm the formatting process.
   
4. The system will then exit automatically.
   Kind reminder: All data will be deleted after formatting. Be sure to back up your important files before formatting. To ensure the memory card's optimal performance, we recommend formatting it every two months. Keep in mind that memory cards have a limited lifespan, and frequent reading, writing, and erasing can shorten their lifespan. If you're prompted about frequent card errors or glitches, please replace it with a new one.

Install the Dash Cam on the Windshield

Attach the GPS bracket

First, attach the bracket onto the dash cam by aligning the notches. Second, attach the GPS buckle onto the bracket by aligning the notches till the buckle is inserted in place.

Prepare the area

First, clean the area thoroughly with a microfiber cloth to remove any dust, dirt, or oil that could affect the bracket's grip. Then, remove the film of the electrostatic sticker and apply the electrostatic sticker to the windshield.

Place the dash cam

First, tear off one film of the bracket sticker and apply it to the bracket. Second, remove another film from the bracket sticker. Lastly, stick the bracket to the selected area on the windshield.

Note: Please make sure there is no air between the electrostatic sticker and the windshield, which is the key point to make the installation more stable.

Tips:

1. If you want to remove the dash cam, be sure to remove the electrostatic sticker.
2. You can install the dash cam on the windshield without using the electrostatic sticker. This allows you to effortlessly remove the camera by simply pushing the GPS buckle towards left.
   
3. If you prefer not to use the electrostatic sticker, it is important to clean and dry the installation area thoroughly before attaching the dash cam directly to the windshield using the bracket sticker.
4. The electrostatic sticker's adhesive properties may diminish over time or when exposed to rain or direct sunlight. Please do not hesitate to contact customer service for some free stickers.

Adjust the viewing angle

The bracket supports a horizontal rotation of up to 60° and a vertical rotation of up to 90°. Moreover, the front camera lens can be rotated up to 220°. So feel free to adjust the bracket and the front camera lens as desired after installing the dash cam on the windshield.

Supports up to 60° horizontal rotation

Up to 90° vertical rotation

Supports up to 220° rotation

Charge

How to charge

To charge your dash cam, please connect the car charger to the dash cam's USB power port, then insert the charger into the car's cigarette lighter socket.

Car cigarette lighter socket

Car power charge

D4 Pro Dash Cam

Note:

1. Please charge the dash cam for 30 minutes before using it. When charging, please turn off the camera by long pressing the power button.
2. Kindly refrain from connecting the camera to your PC for charging purposes. Please utilize the 110V wall outlet instead.

Turn your camera ON/OFF

Auto Power ON:
KINGSLIM D4 Pro dash cam is designed to turn ON automatically when it receives power, i.e. when the car engine is started.

Auto Power OFF:
The camera is also pre-configured to turn OFF automatically within a few seconds when the power gets disconnected, i.e. when the car key is turned to the LOCK position.

Install the Rear Camera

There are two recommended installation positions for the rear camera.

Position 1:
Installing the rear camera on the rear windshield offers a simpler installation process. For this method, please follow these steps to route the power cables:

Position 2:
It is advised to install the rear camera near the license plate. This placement ensures a clear and sharp image for both rear viewing and reversing guidance. For this method, please follow these steps to route the power cables:

To enable the reversing function, please install the rear camera near the license plate and connect the red wire of the rear camera extension cable to the positive lead of the vehicle's reversing lamp.

Note:

1. The rear camera is not waterproof. Please protect it from water and rain.
2. When connecting the rear camera with the extension cable, please refer to the details below.
3. Please clean the area to ensure the adhesive quality before installing the rear camera.
4. Please clean the rear windshield regularly to ensure the image quality if you choose to install the rear camera on the rear windshield.
5. If you choose to install it near the license plate, you can use adhesive stickers or screws for fixing.
6. Please use the original extension cable and rear camera. If you replace the rear camera with product of other brands, the effect may be affected and the machine may be damaged.
7. Check the interface, the connecting wire and the rear camera interface, and make sure they are plugged in tightly.
8. Please plug in the rear camera when the camera is turned off. Do not frequently hot-plug the interface in case any damage is caused to the camera.

For more details, please visit the link attached to watch the installation video: https://www.youtube.com/watch?v=CZYaV5Dh4ok.

Install the Hardwire Kit (sold separately)

This camera comes with a built-in battery designed specifically for parking mode.

To activate parking mode, it is necessary to leave the dash cam plugged in. However, this can result in battery drain. For this reason, we highly recommend installing a hardwire kit for your dash cam.

Installing the hardwire kit not only helps prevent the camera battery from draining the car battery thanks to its smart low voltage protection system but also provides a continuous and stable power supply.

Kind reminder:
For your safety, we strongly advise that you have a professional installer handle the hardwire kit installation.

Introduction of Important Feature

Why does Kingslim make this function button?
Kingslim is dedicated to continuously improving their products based on customer feedback. Quite a few customer customers expressed their desire for a dash cam that can record the interior of the car during both driving and parking. Unfortunately, only a few front and rear cameras available in the market support emergency interior recording.

Kingslim did it!

1. With two years' efforts in R & D, Kingslim's developers have successfully designed the front camera to rotate up to 220°, allowing it to temporarily function as a cabin camera.
2. To activate this feature, simply press the designated button during recording. The camera will flip the Preview interface and switch to the recording screen.

The camera rotation feature is designed to be used under emergencies only! Using this feature at night is likely to have a negative impact on the recording as no IRCUT fill-in light is equipped for the front camera.

Starting Recording

Recording Screen

'

1. Recording Indicator
2. Recording Time
3. Date & Time
4. GPS Icon
5. Audio Recording
6. Wifi Icon
7. Power Status
8. Stop Recording
9. Emergency Recording
10. Snapshot
11. Switch between front and inside views
12. Switch display modes

Gestures

Take a photo

During video recording, press the Photo button to snap a photo.

Switch display modes.

During video recording, press the button to seamlessly transition between the full-screen view of either the front or rear camera, and the picture-in-picture display showing both cameras simultaneously

Display of the front

Display of the rear

Picture-in-picture

Additionally, you can also press the button to flip between the front and inside views of the front camera during video recording

Front View

Inside View

Status Icons

Icons	Descriptions	Interface
	Recording on	Recording
00:00:03	Recording time	Recording
2023-11-11 00:00	Date & Time	Preview
	GPS located successfully	Recording
	Signals searching	Recording
	Microphone indicator on	Preview
	Microphone indicator off	Preview
	Wifi on	Preview
	Wifi off	Preview
	Charging	Preview
	Fully charged	Preview
	Stop recording	Recording
	Start recording	Preview
	Settings	Preview
	Album	Preview
	Flip between front and inside views	Recording
	Switch display modes	Recording
	Snapshot	Recording
	Emergency recording	Recording

LED Indicators

Charging indicator:
Purple and red lights flickering alternately: Charging + Recording video...
Purple light staying on: Charging + not recording

Working indicator:

Blue light staying on: Not recording + battery fully charged
Blue light flickering: Recording video+ battery fully charged + parking monitor activated

Time Zone Setting

Under this setting, you can manually choose the time zone. The device will then display the date and time of the selected time zone. (Default Setting: UTC/GMT-OFF) For more details, go to https://greenwichmeantime.com/time-zone/usa/ to find out your correct GMT (Greenwich Mean Time) value based on your location in USA.

Playback

Playback on the Dash Cam

To playback your videos on the dash cam, first make sure the dash cam is on the preview interface, then press the button under the Album icon to access the playback screen. From there, you can choose to playback normal and emergency videos recorded by the front or rear cameras respectively.

For instance, if you want to watch a video recorded by the front camera, just press the OK button to access the video folder of the front camera, then choose the video you want to playback, and press the OK button, the video will play.

Playback on A PC/MAC

Transfer data

Option 1: Transfer data using a USB cable.

1. First connect the USB cable to the dash cam's USB Type-C power port, then plug the camera into your computer's USB port.
2. Choose to connect as "USB Storage".
   
3. Your computer will recognize the memory card. Please follow the prompts to find the memory card drive on your computer, you will be able to see all the video or photo files as well as the GPS player.

Option 2: Transfer data using a card reader.

1. Take the memory card out of the dash cam. (Be sure to turn off the dash cam first.)
2. Insert it into a card reader, then insert the reader into your computer's USB port.
3. Your computer will recognize the memory card. Please follow the prompts to find the memory card drive on your computer, you will be able to see all your files stored in the memory card.

Playback Videos

To playback videos, please download and install the GPS player, then drag any of the video or photo files to the player. By playing back videos on the GPS player, you can check the GPS information including speed, longitude, latitude, and driving route.

1. You can also visit this link to download the GPS player to a computer: https://kingslim.net/pages/app-gps-download.
2. Now the player is downloaded to the computer.
   
3. Open the GX Player, then drag the GPS video to the file list for playback.
   
4. During playback, you can check the driving route on Google Map, and check speed, longitude, and latitude at the bottom.
   

Tips:

1. The Google map helps you track the driving route, and it displays the default address. If the address remains the same when the video plays, it indicates that the dash cam records the video without the GPS information because the GPS did not work when you were driving.
2. The GPS player won't work on any computers running on the Linux system.

GPS data won't show if you playback the video on your own player.

Playback on the Kingslim APP

You can also playback videos on the Kingslim APP after connecting your dash cam to the app. For more details, please refer to About the Kingslim APP→Playback videos on the Kingslim APP.

Playback on Your Phone's Album

You can also playback videos on your phone's photo album after downloading files from the Kingslim APP. For more details, please refer to About the Kingslim APP→Download videos from the Kingslim APP.

About the Kingslim APP

Once you have successfully connected your dash cam to the Kingslim APP via the camera's Wifi, you will be able to access the camera, view and download videos via the app. You can also control the camera to capture or change the camera.

Download the Kingslim APP

Download the Kingslim APP from the App Store or Google Play.

Connect to the Kingslim APP

1. Press the button to stop recording on the dash cam.
   
2. Turn on the camera's Wifi. To do this, press the Wifi button. The camera will enter Wifi mode and display the Wifi information in about 2 seconds.
   (Note: The camera's Wifi will disconnect automatically once you exit the Wifi screen.)
   
3. Connect the camera's Wifi. To do this, go to your smartphone's Wifi settings page, search for the Wifi SSID, and then tap on it to enter the password 12345678 for Wifi connection.
   

Warm tip:

1. The screenshots below are for your reference only. If you're using an iPhone, we recommend you turn off Celluar before connecting the camera's Wifi.
2. Once the camera Wifi is connected, it will give you a "No Internet Connection" or "Weak Security" notice since the 4G signal of your phone is blocked, but you can ignore it and continue the app connection.

4. Access the Kingslim APP. To do this, open the Kingslim APP, then tap on the "New Account" icon to enter your email and get a verification code for login.
   
   Warm tip: You can tap "Skip" to directly enter the app without bothering to create an account for login.
5. Connect to the Kingslim APP. To do this, tap "Add Recorder" to add your Camera model, then wait for a few seconds till the app loads past the Connecting screen to enter the Preview interface.
   
6. Now your dash cam is successfully connected to the Kingslim APP.
   

Use the Kingslim APP

1. Control your camera using the APP.
   On the Preview interface, you can tap the Power icon to start or stop recording. To take a photo, simply tap the photo icon . The icon is used to switch display modes. But kindly note that this camera records front video only, so there is no way to switch display modes.
   
2. Change the camera settings on the APP.
   To change the camera settings on the Kingslim APP, please tap the Settings icon in the upper right corner to enter the settings screen. By using the phone app, you can change the loop recording time, change the settings of G-Sensor, or Parking mode, and more.
   
3. Get the most out of the APP
   1. Tap Mine → Feedback to send your feedback to our technical team. Your feedback will be properly taken care of by our tech department within 48 hours.
   2. Tap Mine → About to learn about the app version, and access more useful instruction videos by visiting Youtube.com, and Facebook.com.
   3. Tap Mine → Extend Warranty to extend warranty for your order by visiting our official website.
   4. Tap Mine → Prize-Winning Survey to win a gift after completing a small survey.
   5. Tap Mine → Local Album to access videos saved to your phone's album.
      

Playback Videos on the Kingslim APP

1. Tap on the "Video set" icon to view all the video files stored on the memory card.
   
2. Tap on the video you want to watch for playback.

Note: The Kingslim APP works with KINGSLIM dash cams only.

Download Videos from the Kingslim APP

1. Tap on the "Video set" icon to view all the video files stored on the memory card.
   
2. Tap on the icon in the upper right corner, and select the video you want to download.
   
3. Tap on the Download icon in the bottom left corner, then tap "OK" to confirm the download.
   
4. Wait for the completion of the download progress, the video will be saved to your phone's album. You can tap on it for playback or forward it to social media.
   

System Settings

To access the system settings screen, first make sure the dash cam is on the Preview interface, then press the Settings button. You will be able to configure the available settings by using the Down button.

1. Resolution: 4K+2K (default)/2K+2K
   This dash cam records 4K video by default. To change the resolution, first ensure that the dash cam is on the preview screen. Second, press the OK button to access the resolution settings screen. From there, press the Down button to choose from 4K +2K (default) and 2K+2K. After selecting your desired resolution, please press the OK button to save your changes. The system will exit the menu automatically.
   
2. Speed Unit: KM/H (default)/mph You can choose your desired speed unit.
3. Screen Dormant: Off (default)/1 Min/3 Min
   The camera screen will automatically turn off to save battery life after the set time.
   To turn on the display again, simply press any button.
   
4. Antiflicker Mode: 60Hz (default)/50Hz
   Antiflikcker mode refers to the frequency of the alternating current (AC) that is used in most electrical power systems around the world. We recommend you keep the default setting.
   
5. Collision Sensitivity: Off/Low (default)/Middle/High
   When Collision Sensitivity is enabled during video recording, your dash cam will automatically start recording an emergency video and save the content if it detects sudden braking or an impact. The video will be locked in the front or rear emergency folder, preventing it from being overwritten by new video files. By selecting a higher sensitivity level, your dash cam will be more likely to detect smaller impacts and trigger emergency recording.
   Note: The video length varies depending on the option you select for Loop Recording.
   
6. Parking Monitor: Off (default)/Low/Middle/High
   When the car engine is off, the dash cam will enter parking mode automatically. If an impact or sudden braking is detected during parking, the dash cam will automatically start recording a 15-second video and save the content. The video will be locked in the front or rear emergency folder, preventing it from being overwritten by new video files. By selecting a higher sensitivity level, your dash cam will be more likely to detect smaller impacts and trigger emergency recording.
   Note: The display screen will turn off when Parking Monitor mode is triggered.
   
7. Date Format: YY-MM-DD (default)/DD-MM-YY/MM-DD-YY
   You're free to select a desired date format from the available options.
   
8. Audio: On (default)/Off
   You can choose to record video with or without audio.
9. Volume: Mute/Low/Middle (default)/High
   You can adjust the camera's volume to an acceptable level.
10. Loop Recording: 1Min (default)/2Min/3min
    The camera is designed to record video and save the content every minute by default. When the memory is full, the new video files will overwrite the old ones to ensure continuous recording. To change the video length, simply access the loop recording settings screen to select your desired loop recording time.
11. Time Setting
    Please manually set the camera's date and time per your time zone. The dash cam will then display the correct date and time.
    Note: To stamp the date and time when the accident happened, it's of great importance to set the correct date and time of your dash cam before using it.
    
12. Time Zone Setting
    You can choose the time zone manually. The dash cam will then display the time of the selected time zone.
    Options: UTC/GMT-OFF (default), UTC/GMT-+12, UTC/GMT-+11, UTC/GMT-+10, UTC/GMT-+9, UTC/GMT-+8, UTC/GMT-+7, UTC/GMT-+6, UTC/GMT-+5, UTC/GMT-+4: 30, UTC/GMT-+4, UTC/GMT-+3: 30, UTC/GMT-+3, UTC/GMT-+2, UTC/GMT-+1, UTC/GMT+0
13. Time Format: 12H/24H (default)
    You have the option to set the camera's time system to either 12 hours or 24 hours.
14. Language: English (default)/中文简体/ Français/日語/Русский/Español/Deutsch/Italiano/한국어
    You can set the system language for your dash cam.
15. Voice Ctrl: On/Off (default)
    Voice Ctrl (Voice Control) enables you to conveniently control your dash cam through supported voice commands, allowing for hands-free capture. The camera will then respond to the given voice commands, executing various functions. With this intelligent feature, you can focus on driving and mind road conditions ahead, thus ensuring better safety. What's more, this feature allows you to do simple tasks without lifting a single finger, such as recording video, shooting, changing the camera's settings, and more. You can get more convenient user experience by using this feature.
16. Voice Commands
    You can utter any of the supported voice commands to control your dash cam. For more details about these voice commands, please consult the sheet below.

17. Format SD: Yes/No
    This option allows you to format the memory card. For more details about formatting the memory card, please consult the section Getting Started→Memory card use.
18. GPS: On (default)/Off
    You can turn GPS on or off on the setup screen. When GPS is disabled, the GPS icon will not show on the camera screen.
19. GPS Info
    To check if the GPS is working well, you can refer to the GPS information displayed on the screen below. The signals your dash cam is receiving is indicated by the number of the bars, with larger numbers indicating a stronger signal.
    
20. Reset System: Yes/No
    This option will restore all the settings to default values.
    Note: This option will also reboot your dash cam.
    
21. About
    This option allows you to check this dash cam's model and version.

General FAQs

Warm Tip: For any product issues, please feel free to contact us anytime for technical support.

1. What to do if the dash cam does not turn on anymore?
   1. Check if the indicator light on the car charger turns on when your dash cam is plugged in.
   2. If it does not turn on, plug the dash cam into another cigarette lighter or USB port for about one hour to see if it finally turns on.
   3. If your issue remains, kindly contact customer service for further help.
2. What to do if the dash cam keeps turning on and off automatically?
   1. Remove the memory card and plug in your dash cam with a USB cable to see if turns on automatically.
   2. If so, turn it off, then charge it with the original 5V car charger for about one hour. After charging, turn it on manually to see check if it works properly.
   3. If your issue remains, restore your dash cam to the factory settings or contact customer service for further help.
3. What to do if the dash cam does not take charge anymore?
   1. Make sure you plug in your dash cam with the original car charger.
   2. Plug in your dash cam with a USB charging cable to check if it takes charge properly.
   3. If the camera still does not take charge with the USB cable, kindly contact customer service for further help.
4. What to do if you can't connect the Kingslim APP to your dash cam?
   1. Make sure you have installed the up-to-date Kingslim APP on your phone.
   2. Make sure you have connected the camera's Wifi successfully before connecting the app.
   3. Do not exit the Wifi screen during the connection process.
   4. If your issue remains, kindly contact customer service for further help.