Marshall Stanmore II Voice with the Google Assistant built-in - Speaker Manual
  1. Manuals
  2. Brands
  3. Marshall Amplification Manuals
  4. Speakers
  5. Stanmore II Voice with the Google Assistant...
  6. User manual

Marshall Stanmore II Voice with the Google Assistant built-in - Speaker Manual

Advertisement

Table of Contents
Contents
Marshall Stanmore II Voice with the Google Assistant built-in - Speaker Manual

DISCLAIMER

Please note that the availability of third party services, including but not limited to Chromecast built-in, Google Assistant, and this device's compatibility with the same, is subject to the respective rights holder's consent, which may be withdrawn, and supply of such services, which may be terminated, resulting in this device not being compatible with such third-party services, without any liabilities for Zound Industries. The availability of third party services may need separate agreements between you and any third party and Zound Industries do not take responsibility for the availability of such services. The information contained herein is correct at the time of publication, with reservation for editorial errors. This product is software dependent and its functions and compatibility can change when updating the software.

BOX CONTENTS

  1. MARSHALL STANMORE II VOICE WITH THE GOOGLE ASSISTANT BUILT-IN
  2. QUICK START GUIDE
  3. IMPORTANT SAFETY INSTRUCTIONS
  4. MAINS LEAD

GENERAL DESCRIPTION

GENERAL DESCRIPTION - Part 1
GENERAL DESCRIPTION - Part 2

  1. AUX INPUT FOR 3.5 mm JACK
  2. SOURCE INDICATORS
  3. SOURCE BUTTON
  4. VOLUME KNOB
  5. BASS KNOB
  6. TREBLE KNOB
  7. MICROPHONES
  8. PLAY/PAUSE BUTTON 009. MICROPHONE BUTTON
  9. BASS PORT
  10. BACKPLATE
  11. USB SERVICE PORT
  12. RCA INPUT (LEFT AND RIGHT)
  13. MAINS INPUT
  14. MAINS LEAD

PLUGGING IN THE DEVICE


ALWAYS ENSURE THAT THE MAINS LEAD, MAINS PLUG AND SPEAKER ARE COMPATIBLE WITH YOUR MAINS SUPPLY AND WALL SOCKET.

PLUGGING IN THE DEVICE

  1. CONNECT THE MAINS LEAD INTO THE MAINS INPUT ON THE SPEAKER.
  2. CONNECT THE MAINS PLUG TO THE WALL SOCKET.


ALWAYS UNPLUG THE MAINS LEAD FROM THE WALL SOCKET BEFORE DISCONNECTING IT FROM THE SPEAKER.

SETTING UP THE DEVICE

CONFIGURE THE SPEAKER FOR Wi-Fi WITH THE APP. THE APP IS AVAILABLE FROM THE APP STORE AND GOOGLE PLAY.

  1. DOWNLOAD THE APP AND FOLLOW THE IN-APP INSTRUCTIONS TO SET UP YOUR SPEAKER.
    SETTING UP THE DEVICE

www.apple.com

play.google.com

USING THE THE GOOGLE ASSISTANT BUILT-IN

THE STANMORE II VOICE HAS THE GOOGLE ASSISTANT BUILT-IN. YOU CAN PLAY MUSIC, FIND ANSWERS ON GOOGLE SEARCH, MANAGE EVERYDAY TASKS, AND EASILY CONTROL SMART DEVICES AROUND YOUR HOUSE, SIMPLY BY USING YOUR VOICE.

LISTEN TO YOUR FAVOURITE SONG, FIND A DELICIOUS BROWNIE RECIPE, OR CHECK YOUR COMMUTE TO WORK.

USING THE THE GOOGLE ASSISTANT BUILT-IN
JUST START BY SAYING .

  • OK GOOGLE, HOW'S THE WEATHER?
  • OK GOOGLE, TURN UP THE VOLUME.
  • OK GOOGLE, REWIND 15 SECONDS.

SELECTING AUDIO SOURCE

SELECTING AUDIO SOURCE
THERE ARE MANY WAYS TO CONNECT TO YOUR STANMORE II VOICE, EITHER WIRELESSLY OR BY CABLE.

  • - Wi-Fi STREAMING VIA CHROMECAST
  • - WIRELESS Bluetooth CONNECTION
  • AUX - 3.5 mm STEREO JACK
  • RCA - DOUBLE RCA (LEFT AND RIGHT) JACKS
  1. PUSH THE BUTTON TO TOGGLE BETWEEN Wi-Fi, Bluetooth, AUX AND RCA AUDIO SOURCE.
  2. A LIT INDICATOR SHOWS WHICH SOURCE IS SELECTED.


MAKE SURE THAT THE VOLUME IS SET TO LOW ON BOTH THE SPEAKER AND THE MUSIC PLAYER BEFORE USING THE SPEAKER.

USING THE UNIT WITH Chromecast built-in

Chromecast built-in IS A PLATFORM THAT LETS YOU STREAM YOUR FAVOURITE MUSIC FROM YOUR SMARTPHONE, TABLET OR COMPUTER RIGHT TO YOUR SPEAKER. IT IS AVAILABLE IN MOST MUSIC APPS ON THE MARKET.
USING THE UNIT WITH Chromecast built-in

  1. CONNECT YOUR DEVICE TO THE SAME Wi-Fi NETWORK AS YOUR SPEAKER.
  2. PLAY MUSIC IN YOUR FAVOURITE MUSIC APP.
  3. TAP THE Chromecast built-in ICON IN YOUR MUSIC APP AND SELECT YOUR .

CONNECTING VIA Bluetooth (PAIRING)

  1. SELECT Bluetooth AS THE INPUT. PUSHING THE BUTTON TOGGLES THE INPUT SOURCES.
  2. PUSH AND HOLD THE BUTTON FOR 2 SECONDS.
    THE Bluetooth INDICATOR STARTS TO BLINK.
  3. ENABLE Bluetooth ON YOUR DEVICE (SMARTPHONE, TABLET, COMPUTER).
  4. SELECT FROM THE Bluetooth LIST AND ACCEPT PAIRING.
    THE Bluetooth INDICATOR ON THE SPEAKER STOPS BLINKING AND REMAINS LIT WHEN THE UNITS ARE CONNECTED.

THE STANMORE II VOICE STORES UP TO EIGHT Bluetooth DEVICES AND TRIES TO CONNECT TO THE LAST CONNECTED DEVICE FIRST.
FOR EXAMPLE, IF THE SPEAKER HAS BEEN CONNECTED TO THE DEVICES: DEVICE IS GIVEN FIRST PRIORITY, WHILE DEVICE IS GIVEN LAST PRIORITY. EVERY TIME IS SELECTED, THE SPEAKER WILL PERFORM AN AUTO CONNECTION OF DEVICES WITHIN ITS RANGE.

CONNECTING VIA AUX INPUT

CONNECTING VIA Bluetooth
information NOTE: AUDIO LEADS ARE NOT INCLUDED IN THE STANMORE II VOICE.

  1. CONNECT A 3.5 mm STEREO JACK TO THE INPUT LABELLED ON THE TOP OF SPEAKER.
  2. CONNECT THE OTHER END OF THE LEAD TO THE AUDIO OUTPUT ON YOUR AUDIO SOURCE.
  3. SELECT AUX AS THE INPUT. PUSHING THE BUTTON TOGGLES THE INPUT SOURCES.

CONNECTING VIA RCA INPUT

CONNECTING VIA RCA INPUT
information NOTE: TURNTABLE MUST BE EQUIPPED WITH A RIAA PREAMPLIFIER, OTHERWISE A SEPARATE PREAMPLIFIER IS NEEDED.

  1. CONNECT A LEAD WITH RCA JACKS TO THE INPUTS LABELLED ON THE BACK OF THE SPEAKER.
  2. CONNECT THE OTHER END OF THE LEAD TO THE OUTPUT ON YOUR AUDIO SOURCE.
  3. SELECT RCA AS THE INPUT. PUSHING THE BUTTON TOGGLES THE INPUT SOURCES.

ADJUSTING THE VOLUME/BASS/TREBLE

ADJUSTING THE VOLUME/BASS/TREBLE
THE STANMORE II VOICE INCLUDES THREE KNOBS FOR ADJUSTING THE AUDIO.

  1. VOLUME KNOB
  2. BASS KNOB
  3. TREBLE KNOB

PLAY/PAUSE CONTROL

PLAY/PAUSE CONTROL
THE STANMORE II VOICE HAS A PLAY/PAUSE BUTTON TO CONTROL THE MUSIC WHEN PLAYING VIA Wi-Fi OR Bluetooth.

  1. SINGLE-CLICK TO EITHER PLAY OR PAUSE.
  2. DOUBLE-CLICK TO SKIP FORWARD.
  3. TRIPLE-CLICK TO SKIP BACK.

MUTING/UNMUTING THE MICROPHONE

MUTING/UNMUTING THE MICROPHONE
THE MICROPHONES IN THE STANMORE II VOICE CAN BE TEMPORARILY TURNED OFF.

information NOTE: GOOGLE ASSISTANT CAN NOT BE ACCESSED WHILE THE MICROPHONES ARE MUTED.

  1. PUSH THE MICROHONE BUTTON MUTE THE MICROPHONES.
    THE LED INDICATORS ON THE FRONT TURNS ORANGE TO INDICATE THAT THE MICROPHONE IS MUTED.
  2. TO UNMUTE, PUSH THE MICROPHONE BUTTON AGAIN.
    THE LED INDICATORS ON THE FRONT TURNS OFF TO INDICATE THAT THE MICROPHONE IS UNMUTED.

TECHNICAL INFORMATION

ACOUSTIC SPECIFICATION

  • STEREO LOUDSPEAKER WITH BASS REFLEX SYSTEM
  • DIGITAL CLASS D AMPLIFIERS: 2 x 15 W + 1 x 50 W
  • TWEETERS: 2 x ¾" dome tweeters
  • WOOFER: 1 x 5¼" woofer
  • BASS AND TREBLE TONE CONTROLS
  • FREQUENCY RESPONSE: 50–20,000 Hz ±6 dB
  • MAXIMUM SOUND PRESSURE LEVEL: 101 dB SPL @ 1 m

TECHNICAL INFORMATION

  • MAINS INPUT VOLTAGE: 100–240 VAC
  • MAINS FREQUENCY: 50/60 Hz
  • WIRELESS CONNECTIVITY:
    • Chromecast built-in
    • Bluetooth
  • WIRED CONNECTIVITY:
    • AUX: 3.5 mm stereo jack
    • RCA (left and right)
  • Wi-Fi SUPPORT: Connects to your home Wi-Fi network with any WPA, 802.11b/g/n/ac 2.4 GHz/5 GHz with diversity.
  • SIZE: 350 x 195 x 185 mm
  • WEIGHT: 4.65 Kg
  • VOICE CONTROL SERVICE: Google Assistant
  • MICROPHONE SYSTEM: Two omnidirectional microphones on the top panel for voice interaction.

Internal unit layout
information NOTE: THE FRONT OF THE SPEAKER IS NOT REMOVABLE. THIS ILLUSTRATION INTENDS TO SHOW THE INTERNAL SPEAKER LAYOUT. DO NOT ATTEMPT TO REMOVE THE FRET FOR RISK OF DAMAGING YOUR SPEAKER.

TROUBLESHOOTING

PROBLEM CAUSE ACTION
THE STANMORE II DOES NOT TURN ON The speaker is not connected to mains electricity supply. Connect the mains lead to the Stanmore II and a working wall socket. Pull and hold the power lever towards the front of the speaker until the indicators light up.
THE STANMORE II VOICE CANNOT BE DISCOVERED BY THE GOOGLE HOME APP The speaker is not in setup mode. Select Wi-Fi as the input. Push and hold the Source button for 3 seconds to set the speaker in discoverable mode.
The speaker and the mobile device are not connected to the same Wi-Fi network. Ensure that your mobile device is connected to the same Wi-Fi network that the speaker was configured on.
THE GOOGLE ASSISTANT IS NOT RESPONDING The microphone is muted on the speaker. Push and hold the microphone button for 3 seconds. The LED indicators on the front turns off to indicate that the microphone is unmuted.
THERE IS NO AUDIO OR AUDIO IS TOO LOW The wrong audio source is selected. Ensure that the device is connected to the Stanmore II. Check that no other device is connected and playing.
Volume is set too low on either the audio source or the speaker. Slightly increase the volume on your audio source or the speaker.
CANNOT CONNECT OR PAIR WITH A Bluetooth DEVICE Bluetooth is not enabled on your device (smartphone, tablet, computer). Activate Bluetooth on your device.
There are already two devices connected to the speaker. Disconnect one of the connected Bluetooth devices before connecting to the speaker.
The speaker is not in pairing mode. Push and hold the Bluetooth button for 3 seconds to make the speaker discoverable by the device.
THE SPEAKER IS NOT RESPONDING A software problem has occurred. Unplug the mains power plug from the wall socket, wait for 15 seconds, then plug it in again.

Perform a factory reset.

Note: This will delete all user settings and after the factory reset, the speaker needs to be set up again.

Push and hold both the Source button and the Play/pause button for 7 seconds.
BLUETOOTH CONNECTION DROPS OUT The two Bluetooth devices are too far apart or the connection is affected due to obstacles. Move the devices closer so that they are within 10 metres, and unobstructed by obstacles such as walls or doors.
There is a strong electric field surrounding the Stanmore II. Items such as microwave ovens, wireless network adapters, fluorescent lights and gas cookers use the same frequency range as the Bluetooth device. This may lead to electrical disturbances.
THERE IS A CRACKLING SOUND The amplifier is clipping as it has run out of output power. Decrease the volume on your audio source.
Lower the volume or bass on the Stanmore II.
THE AUDIO IS DISTORTED Volume is set too high on the audio source. Turn down the playback volume on the audio source.
The audio stream or audio file is of poor quality. Try another audio file or music player.
Volume is set too high on the Stanmore II. Lower the volume on the speaker.
Too much bass/treble on the speaker. Lower the bass/treble on the speaker.
ERRATIC PERFORMANCE Interference from another electronic device. Move the Stanmore II to another spot.
Turn off or move the interfering electronic device.

information NOTES:
A Wi-Fi DEVICE COULD CAUSE AUDIO-RELATED OR TECHNICAL FAULTS, DEPENDING ON USE, IN THE FOLLOWING CASES:

  • WHEN SOME PART OF THE BODY IS IN CONTACT WITH THE RECEIVING/TRANSMITTING SYSTEM FOR THE Wi-Fi DEVICE OR THE STANMORE II.
  • ELECTRICAL VARIATIONS DUE TO OBSTACLES IN THE FORM OF WALLS, CORNERS, ETC.
  • EXPOSURE TO ELECTRICAL DISRUPTIONS FROM DEVICES WITHIN THE SAME FREQUENCY BAND, FOR EXAMPLE MEDICAL EQUIPMENT, MICROWAVE OVENS OR OTHER WIRELESS NETWORKS.

THIS WIRELESS DEVICE MAY CAUSE ELECTRICAL DISRUPTIONS DURING USE.

  • Design of device and packaging are intellectual properties of Zound Industries International AB and Marshall Amplification Plc. © All Rights Reserved. Zound Industries International AB is hereinafter referred to as "Zound Industries" or "manufacturer".
  • MARSHALL, Marshall Amps, their respective logos, "Marshall" and "Marshall" trade dress are trademarks and intellectual property of Marshall Amplification Plc and may not be used without permission. Permission granted to Zound Industries.
  • Wi-Fi, the Wi-Fi logo and the Wi-Fi CERTIFIED™ logo is a certification mark of Wi-Fi Alliance.
  • The Bluetooth wordmark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Zound Industries is under license.
  • Google, Google Play, Google Assistant, Chromecast built in and their respective logos are trademarks of Google LLC.
  • Apple and the Apple logo are trademarks of Apple Inc. registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries.
  • All other trademarks are the property of their respective owners and may not be used without permission.

For more legal information related to this product and to its use in your specific region, and for more detailed information about Zound Industries and partner & license information, please visit the website: www.marshallheadphones.com. The user is recommended to visit the website regularly for up-to-date information.

Zound Industries International AB, Centralplan 15, 111 20 Stockholm, Sweden

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Marshall Stanmore II Voice with the Google Assistant built-in - Speaker Manual

Advertisement

Need help?

Need help?

Do you have a question about the Stanmore II Voice with the Google Assistant built-in and is the answer not in the manual?

Questions and answers

Related Manuals for Marshall Amplification Stanmore II Voice with the Google Assistant built-in

Save Article as PDF

Table of Contents