EDIFIER W820NB Plus - Wireless Noise Over-Ear Headphones Manual

Power ON/OFF

Note:
Under wireless mode:

1. If there is no Bluetooth connection for 5 minutes after power on, the headphones will turn off automatically.
2. If there is no Bluetooth connection when the noise cancellation is on, the headphones will turn off automatically after 4 hours.

Pairing for the first time

1. Press and hold the "" key for about 3s when powered off. Blue and green LED will blink alternately and rapidly.
2. Select "EDIFIER W820NB Plus" in your device setting to connect. Blue LED will blink twice after connected.

Note:
For subsequent use, the headphones will automatically connect to the device used last time.

Pairing for new device

1. Press and hold the "" key for about 6s when powered off to skip the latest connected device and pair the new Bluetooth device. Blue and green LED will blink alternately and rapidly.
2. Select "EDIFIER W820NB Plus" in your device setting to connect. Blue LED will blink twice after connected.

Simultaneously press and hold the " " " " keys for about 5s when powered on to clear pairing records. Blue LED will blink 6 times rapidly when successful.

Charging

1. Connect the small end of the included USB cable to the USB-C port of the headphones and connect the other end to a USB-A power supply or wall charger (not included).
2. Orange LED is steady lit when charging and off when fully charged.

Note:
Please do not charge the headphones when there is sweat or other liquids inside the charging port, which may damage the headphones.

Input: 5V1A

1. Connect the small end of the included USB cable to the USB-C port of the headphones and connect the other end to the USB-A port of the PC. You can listen to music, talk and charge the headphones after the connection is successful.
2. Orange LED is steady lit when charging and green LED is steady lit when fully charged.

Note:
It is recommended to use the included USB cable, and other cables may have compatibility issues that prevent them from working properly.

Note:

1. : Press and hold.
2. Default sound control: noise cancellation & ambient sound.
3. Images are for illustrative purposes only and may differ from the actual product.
4. Download Edifier Connect App for more customizable control settings.

For more information, please visit our website:

www.edifier.com

@Edifierglobal

@Edifier_Global

@Edifier_Global

Model: EDF200117

Edifier International Limited

P.O. Box 6264

General Post Office

Hong Kong

www.edifier.com

2023 Edifier International Limited. All rights reserved. Printed in China

NOTICE:
For the need of technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice.

Products of EDIFIER will be customized for different applications. Pictures and illustrations shown on this manual may be slightly different from actual product.

If any difference is found, the actual product prevails.