Siemens LMS SCADAS XS - Software Quick Start Guide

What's in the box

1. LMS SCADAS XS
2. Hard case for LMS SCADAS XS
3. Charger and adapters
4. 2 x USB cable
5. Micro SD card & adapter
6. Tablet and software
7. Charger for the tablet
8. Soft bag
9. Cables CAN, SPDIF, TACHO, LEMO 9 pin to BNC
10. GPS

Buttons and connections

REC
Start/Stop recording in standalone mode.

REPLAY/SELECT
Replays the last measurement in Standalone mode

Toggle operation modes
Press and hold
Replay/Select
+
Press BAT to switch operation mode

First use

All systems are delivered with a fully charged battery, Installed software licenses and tablet software and proper wireless settings between the tablet and the LMS SCADAS XS frontend.

For trouble shooting please contact your local representative or visit support website: http://www.siemens.com/gtac/

This Guide is not intended to substitute the User Manual dedicated to LMS SCADAS XS, LMS Test. Lab, LMS Test. Xpress, LMS Smart Scope applications and the tablet. Please read the documentation shipped with the LMS SCADAS XS.

How to start

1. Check if your device is fully charged by tapping the BAT button. (AC adapter/charger included)
   
2. Connect your measurement sensors to the proper input. Use the cables shipped with the device if necessary.
   
3. Turn on your LMS SCADAS XS by press and hold the BAT button for 3 sec. Choose the input mode (USB, LAN, WIFI).
   

Operation modes

Frontend mode

LMS SCADAS XS connected to a PC via USB or LAN. Measurement controlled by the LMS Test. Lab or LMS Test Xpress software. Data stored on PC disk.

Open the cap to get access to the USB receptacle. Please be aware to insert the plug with the proper side into the connector.

Tablet mode

LMS SCADAS XS connected to a tablet via Wifi. Measurement controlled by LMS Smart Scope tablet application. Data stored on Micro SD card.
Insert Micro SD card into LMS SCADAS XS and switch ON the device. Launch LMS Smart Scope application from the tablet. Use the app to create a setup or use an existing measurement template.

Standalone mode

No tablet or PC required for operation. LMS SCADAS XS using preconfigured measurement template from the Micro SD card.
Create a setup in Frontend or in Tablet mode. Insert Micro SD card in the LMS SCADAS XS. Start and Stop measurements using REC button. Data stored on Micro SD card.

LED Status

Siemens PLM Software

Headquarters
Granite Park One
5800 Granite Parkway
Suite 600
Plano, TX 75024
USA
+1 972 987 3000

Americas
5755 New King Court
Troy, MI 48098
USA
+1 248 952 5664

Europe
Researchpark Haasrode 1237
Interleuvenlaan 68
3001 Leuven
Belgium
+32 16 384 200

Asia-Pacific
Suites 4301-4302, 43/F
AIA Kowloon Tower,
Landmark East
100 How Ming Street
Kwun Tong, Kowloon
Hong Kong
+852 2230 3308

About Siemens PLM Software
Siemens PLM Software, a business unit of the Siemens Digital Factory, is a world-leading provider of product lifecycle management (PLM) software, systems and services with nine million licensed seats and 77,000 customers worldwide. Headquartered in Plano, Texas, Siemens PLM Software helps thousands of companies make great products by optimizing their lifecycle processes, from planning and development through manufacturing and support. Our HD-PLM vision is to give everyone involved in making a product the information they need, when they need it, to make the smartest decisions. For more information on Siemens PLM Software products and services, visit www.siemens.com/plm.

© 2016 Siemens Product Lifecycle Management Software Inc. Siemens and the Siemens logo are registered trademarks of Siemens AG. LMS, LMS Imagine. Lab, LMS Imagine. Lab Amesim, LMS Virtual. Lab, LMS Samtech, LMS Samtech Caesam, LMS Samtech Samcef, LMS Test. Lab, LMS Soundbrush, LMS Smart, and LMS SCADAS are trademarks or registered trademarks of Siemens Industry Software NV or any of its affiliates. All other trademarks, registered trademarks or service marks belong to their respective holders.

www.siemens.com/plm/lms

Documents / Resources

References

• Support Services | Siemens Software
• Design, manufacturing and lifecycle management | Siemens Software

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Siemens LMS SCADAS XS - Software Quick Start Guide