Ecozy IM-SS440A - Ice Maker Manual

IMPORTANT SAFETY INSTRUCTIONS

To reduce the risk of fire, electric shock, or injury during ice-making operation, always read carefully and obey all safety information.
ALL SAFETY INFORMATION WILL FOLLOW THE SAFETY ALERT SYMBOLS BELOW

	SAFETY PRECAUTIONS You need to follow these instructions and execute.
	PROHIBITED MATTERS Prohibit these operations; otherwise, it will cause danger.

Read and follow these instructions.

Use this ice maker only for its intended purpose as described in this user manual.

Do not use other liquid to make ice cubes other than water.

If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

Do not turn the ice maker upside down or tilt it more than 450 during transportation or use, If it happens, let it stand upright for at least one hour before plugging in and using it again.

Plug the ice maker into a grounded 3 prong outlet with 110~120V/60Hz power supply:

It is suggested to put the ice maker in a cool and ventilated place, which will greatly improve the ice producing capacity.

Unplug the ice maker before cleaning, repairing or servicing.

Do not use flammable liquid to clean the ice maker.

Place this ice maker away from direct sunlight and make sure that there is at least 6 inches(15 cm) of free space between all sides of your ice maker and surrounding objects.

Keep flammable materials and vapors, such as gasoline, away from the ice maker.

Do not use an extension cord.

Packaging materials can be dangerous for childrem There is a potential risk of suffocation! Keep all the packaging materials away from children,

To avoid a hazard due to instability of this ice maker, it must be placed on an even or flat surface.

Do not remove the ground prong. This ice maker must be properly grounded. Never plug the power cord into a receptacle that is not grounded well and not in accordance with local and national codes.

Children should be supervised to make sure that they do not play with the appliance.

Do not place the power cord over carpets, rugs, etc.
Do not cover the cord and do not submerge it in water.

PACKAGE CONTENTS

*If there is any part missing, please contact our customer service: support@ecozy.com

PRODUCT OVERVIEW

Ice Maker

Control Panel and LED Display

ON/OFF Button

• Start or stop making ice
• During the process of ice-making, press апа hold this button for 5 seconds to do a forced ice harvest

TIMER Button

• Set а timer to automatically stop making ice ог start making ice
• Press апа hold this button for more than 5 seconds to enter self-cleaning mode

TIME + Button
Increase the time duration for making ice

TIME - Button
Reduce the time duration for making ice

BEFORE FIRST USE

1. Unpack the ice maker, then remove all the packaging materials.
2. Clean the interior of the ice maker, the ice basket and the ice shovel with warm water and a soft cloth for 3-5 times to remove possible odor or residue caused by the manufacturing or transportation.
3. Place the ice maker on a level surface in a location where your ice maker is protected from direct sunlight and other sources of heat (such as a stove, furnace, or radiator).
   
4. Make sure to leave at least 6 inches(15 cm) clearance on all sides of the ice maker for proper air circulation.
   
5. Before plugging in, please let the ice maker stand upright for 1 hour to allow the refrigerant to settle.
6. Plug the ice maker into a well-grounded outlet.
   
   
   Improper use of the plug may result in the risk of electrical shock.

USE YOUR ICE MAKER

Add Water

After plugging in, the ice maker is ready to make ice cubes and the LED display lights up. The indicator on the LED display keeps flashing because there is no water in the water tank. Please add at least 1 liter of water in and then the indicator will be off in about 3 minutes.

Note:
Please fill the water tank with clean drinking water.

Start/Stop Making Ice

1. Press to start making ice with the default time. The indicator on the LED display starts rotating. Press again to stop making ice.
   
2. During thе process of ice-making, you can press апа hold for 5 seconds to do а forced ice harvest.

Note:
If the ice maker 15 shut down within 5 minutes, please wait at least 5 minutes to restart the ice maker.

Adjust Ice Cube Size

When the ice maker is running, the size of ice cubes can be adjusted by increasing or reducing the time duration for making ice. Firstly, press or to start; the letter M starts flashing on the LED displav+ Secondly, press or again to set a desired time duration for making ice.
You can increase or reduce at most 6 minutes based on the default time. The longer time duration of ice-making, the larger size of ice cubes, and vice versa. The ice maker will work according to the new setting on the next cycle.

Tip:
Depending оп the ambient апа water temperature, the ice-making cycle may last for 13 10 25 minutes. For the first-time use, ice-making period may take longer than usual but less than 35 minutes.

Countdown

During the process af ice-making, the LED display will display a countdown, telling you the remaining time of the ice-ma king cycle. When the countdown ends, the ice harvest starts.

Timer

You can set a timer to automatically stop making ice when the ice maker is running, or to automatically start making ice when the ice maker is off. Firstly, press to start; the letter H starts flasing on the LED display. Secondly, press or to select the time duration from 1 hour to 24 hours.

Tip:
Press the button again to cancel the timer setting.

Ice Full Reminder

The indicator will light up when the ice sensor detects the full basket. Please remove the ice cubes from the basket in time, then the ice maker will resume working,

Self-cleaning Mode

When the ice maker is not making ice, you can press and hold for 5 seconds to enter the selfcleaning mode. The indicator keeps flashing. This process takes about 20 minutes.

Tip:
This mode can be manually terminated by pressing at any time.

Water Drain

After the ice maker finishes the ice-making, you can take out the cap on the water drain plug to drain the water in the tank.

Note:
Please make sure the ice maker is powered on; otherwise, the water in the tank cannot be drained completely.

Tips:

• It is better to change the water every 24 hours.
• If the ice maker is not in use, please clean it and dry all the parts of it.
• Please use clean drinking water. Please do not use beverages including sparkling water and coke, which may cause the pipes to be clogged.

SPECIFICATIONS

TROUBLESHOOTING

Issue	Possible Cause(s)	Solution
lights up	No enough water	Please add аt least 1 liter оf water in аnd then thе indicator will be оff in about 3 minutes.
lights uр	Too many ice cubes in thе basket	Remove the ice cubes from thе basket.
Е1 lights uр	Ambient temperature sensor malfunctions.	Contact our customer service.
Е2 lights uр	Water temperature sensor malfunctions.	Contact our customer service.
Iсе cubes аге sticking together	The time of ice-making is too long	Reduce the ice-making time.
Ice cubes are thin	Ambient temperature is too high	Move the ice maker to another cool place.
	Water temperature is too high	The water temperature should be no more than 25°C(77°F).
	The time of ice-making is too short	Increase the ice-making time.
Ice-making cycle is normal, but no ice cubes are formed	Itis not the time to form the ice cubes	For the first-time use, the ice-making cycle may take longer; please wait patiently.
	Refrigerant leaks	Contact our customer service.
The water flows slowly in the supply | pipe during ice-making process	Wateris frozen in the supply pipe	Just wait for a while; the water will be automatically melted.

If there is any issue unresolved, please contact us at: support@ecozy.com.

Thank you for purchasing from ecozy. If you have any questions or need further assistance, please contact us at support@ecozy.com or call us via hotline (443) 991-8777 (UTC 14:00-22:00, Monday to Friday).