CodaOctopus Martech Watchdog2 User Manual

CodaOctopus Martech Watchdog2 User Manual

Fire sprinkler controller

Advertisement

Test, Measurement and Control Solutions for Demanding Applications
Watchdog2 Fire Sprinkler Controller USER Guide
This document provides essential information for the owner/user/householder on the Watchdog2.
INTRODUCTION
The Watchdog2 sits at the heart of the fire sprinkler system,
monitoring sensors and performing periodic tests to help
ensure that the system is fully functioning and ready at all
times.
This document is intended to provide essential
information for the user or householder in the event that
a problem arises.
The Watchdog is only one part of the fire sprinkler system,
and other parts such as sensors pumps and valves are
required to create a complete system, but are not covered
here. Please refer to the fire sprinkler system installer for
full details of your installation.
WARNING
– Users/householders should not attempt to perform maintenance themselves. This
document is intended to provide basic guidance to users on the appropriate action in the event of an
unexpected situation. Always seek professional advice from a sprinkler installer or qualified electrician.
WARNING
– Watchdog2 is a safety critical device and MUST be installed by a qualified electrician/electrical
engineer and serviced by a qualified sprinkler engineer in accordance with relevant electrical installation
regulations and relevant fire sprinkler regulations.
Failure to correctly install, configure and maintain the system as a whole, may result in the fire sprinkler
failing to operate when required, resulting in loss of life or severe injury.
Risk of Electric Shock.
Do not open or remove the cover on the Watchdog2. There are no user serviceable
parts inside, and there is a risk of electric shock or loss of life due to live mains voltages (230Vac) inside.
Coda Octopus Martech Ltd. (Martech) accepts no responsibility for failure of any kind resulting from
incorrect installation or failure to maintain the system or from installation or maintenance
by unqualified installers
For the latest version of this manual and additional resources and technical support,
please visit
www.firesprinklerwatchdog.com
or scan the QRcode:
Coda Octopus Martech Limited
17 Mereside, Osprey Quay, Portland, Dorset DT5 1PY, UK.
Page 1of 5
t: +44 (0)1305 770440 f: 07092 870664 martech@codaoctopus.com, www.martechsystems.co.uk
Company No. 02300406, VAT No. 510892555
A Coda Octopus Company, Headquartered in USA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Martech Watchdog2 and is the answer not in the manual?

Questions and answers

Summary of Contents for CodaOctopus Martech Watchdog2

  • Page 1 QRcode: Coda Octopus Martech Limited 17 Mereside, Osprey Quay, Portland, Dorset DT5 1PY, UK. Page 1of 5 t: +44 (0)1305 770440 f: 07092 870664 martech@codaoctopus.com, www.martechsystems.co.uk Company No. 02300406, VAT No. 510892555 A Coda Octopus Company, Headquartered in USA...
  • Page 2 Sprinkler heads ONLY open when heat is applied, such as during a fire. The Watchdog2 cannot cause the sprinkler system to operate unless there is a fire and a sprinkler head has opened. CodaOctopus Martech Limited Commercial in Confidence www.firesprinklerwatchdog.com...
  • Page 3: Basic Controls And Indicators

    Take immediate action to evacuate the premises if necessary. To temporarily SILENCE the Watchdog2, press the reset button for approx. 1 second. CodaOctopus Martech Limited Commercial in Confidence www.firesprinklerwatchdog.com Page 3 of 5 P:\Projects 20001-20999\20092 FireSAFE 2020 development (INTERNAL Manuals\Watchdog2\Watchdog2 USER Guide 20092-04-36-HBK iss 01.docx...
  • Page 4: Led Indicators

    ON when a USB stick is inserted and read/write is in progress (sounder sounds when read/write is complete) POWER (green) Mains power connected. Illuminated all the time when main power available. CodaOctopus Martech Limited Commercial in Confidence www.firesprinklerwatchdog.com Page 4 of 5 P:\Projects 20001-20999\20092 FireSAFE 2020 development (INTERNAL Manuals\Watchdog2\Watchdog2 USER Guide 20092-04-36-HBK iss 01.docx...
  • Page 5: Button Functions

    9. Run on for X secs after pressure reinstated (jockey run period) 10. If any faults detected, set fault o/p 11. TESTING LED OFF CodaOctopus Martech Limited Commercial in Confidence www.firesprinklerwatchdog.com Page 5 of 5 P:\Projects 20001-20999\20092 FireSAFE 2020 development (INTERNAL...

Table of Contents