Do you have a question about the Rotator PetPro Lift-Away LA555 Series and is the answer not in the manual?
Questions and answers
Edward Hammersley
February 5, 2025
LA555 foam filters
1 comments:
Mr. Anderson
February 10, 2025
The foam filters for the Shark Rotator PetPro Lift-Away LA555 Series are pre-motor filters that need to be regularly rinsed with cold water and air-dried for at least 24 hours before reinstalling. They should not be cleaned with soap. Regular maintenance of these filters helps maintain suction power and the effectiveness of the Odor Neutralizer Technology.
This answer is automatically generated
Diane Schamens
March 18, 2025
Do I have an odor neutralizer on model #La4555
1 comments:
Mr. Anderson
March 18, 2025
Yes, the Shark Rotator PetPro Lift-Away LA555 Series has an Odor Neutralizer Technology.
This answer is automatically generated
Karen L. Moore
April 24, 2025
How do you access brush roller from Shark LA555
Related Manuals for Shark Rotator PetPro Lift-Away LA555 Series
Store your vacuum cleaner finished surfaces. 23. Your Shark® vacuum may not Cleaning and user maintenance shall with the power cord secured around b) Eye contact: Remove contact lenses be designed to stand up on its own.
ASSEMBLY ASSEMBLY (Click) (Click) Upper Cord Hook (Turn to Tool Storage Click) Posts Lower Cord Hook (Click) (Click) POWER CORD 1. Place Pod down onto Nozzle. 2. Insert Wand into Pod. 3. Insert Handle into wand. 4. Attach Hose to back of pod. 5.
Page 4
TECHNOLOGY SETTINGS ODOR NEUTRALIZER TECHNOLOGY SETTINGS ODOR CARTRIDGE REPLACEMENT 1. REMOVE ODOR DIAL 2. REMOVE OLD ODOR FROM NOZZLE CARTRIDGE ODOR DIAL Flip up the handle and rotate the dial clockwise Rotate the cartridge counterclockwise Flip up the dial handle and rotate the odor dial until the two teal arrows are aligned.
WHOLE-HOME CLEANING WHOLE-HOME CLEANING SETTINGS CLEANING MODES POWER/SURFACE SWITCH SUCTION CONTROL UPRIGHT MODE LIFT-AWAY MODE The Suction Control Slider located on the To engage Brushrolls, select a Select surface setting: Step on the pedal on the floor handle allows you to adjust the suction surface setting, step on floor nozzle nozzle to lift off the pod.
EMPTYING THE DUST CUP CLEANING THE FILTERS IMPORTANT: Unplug the power cord before performing any maintenance. Regularly rinse and replace the filters to maintain your vacuum's suction power and to maximize the effectiveness of the Odor Neutralizer Technology. Rinse filters with cold water only. Allow all filters to air-dry for at least 24 hours before Empty the dust cup each time you vacuum and periodically during cleaning, reinstalling them to prevent liquid from being drawn into electronic parts.
MAINTENANCE CHECKING FOR BLOCKAGES NOZZLE MAINTENANCE SELF-CLEANING BRUSHROLL If any hair is wrapped around the brushroll, continue vacuuming, using Carpet/Low Pile mode on a bare floor surface, a low-pile carpet, or a small area rug. This will allow the self-cleaning brushroll to remove the hair wrap and send it to the dust cup.
AVAILABLE ACCESSORIES TROUBLESHOOTING Power cord caught in brushrolls or floor nozzle. Crevice Tool • To minimize the risk of power cord damage, DO NOT run the vacuum over the power cord. This slender tool offers extended reach to access corners, baseboards, tight spaces, If this occurs, immediately shut off power to the vacuum and remove the cord from the and ceilings.
SharkNinja will cover the cost for the customer to send in the unit to us for repair or replacement. A fee of $25.95 (subject to change) will be charged when SharkNinja ships the repaired or replacement unit. 2. Manufacturer: Shark Ninja 89 A Street Needham, MA 02494 How to initiate a warranty claim 3.
Page 10
NOTES NOTES s h a r kc l e a n . c o m s h a r kc l e a n . c o m...
Page 11
PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE. This Owner’s Guide is designed to help you get a complete understanding of your new Shark® Rotator® PetPro Lift-Away® ADV Upright Vacuum with DuoClean® PowerFins® HairPro™ and Odor Neutralizer Technology. SharkNinja Operating LLC...
Need help?
Do you have a question about the Rotator PetPro Lift-Away LA555 Series and is the answer not in the manual?
Questions and answers
LA555 foam filters
The foam filters for the Shark Rotator PetPro Lift-Away LA555 Series are pre-motor filters that need to be regularly rinsed with cold water and air-dried for at least 24 hours before reinstalling. They should not be cleaned with soap. Regular maintenance of these filters helps maintain suction power and the effectiveness of the Odor Neutralizer Technology.
This answer is automatically generated
Do I have an odor neutralizer on model #La4555
Yes, the Shark Rotator PetPro Lift-Away LA555 Series has an Odor Neutralizer Technology.
This answer is automatically generated
How do you access brush roller from Shark LA555