1. Manuals
  2. Brands
  3. Miele Manuals
  4. Oven
  5. CS 1028 G
  6. Installation instructions manual

Miele CS1028 G Installation Instructions Manual

Hide thumbs Also See for CS1028 G:
Table of Contents

Advertisement

Quick Links

Download this manual
Installation Instructions
CS1028 G
en-CA
Installation, repair and maintenance work should be performed by
a Miele authorized service technician in accordance with national
and local safety regulations and the provided installation instructions.

Advertisement

Table of Contents
loading

Related Manuals for Miele CS1028 G

Summary of Contents for Miele CS1028 G

  • Page 1 Installation Instructions CS1028 G en-CA Installation, repair and maintenance work should be performed by a Miele authorized service technician in accordance with national and local safety regulations and the provided installation instructions.
  • Page 2 WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death. – Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS Children WARNING- When using your gas Children should not be left appliance follow basic unattended in an area where the precautions, including the appliance is in use. Never allow following: children to sit or stand on any part of the appliance.
  • Page 4 Install the appliance so that the power cord and gas piping do not Installation, repair and maintenance come into contact with any portion of work should be performed by a Miele the combiset which may become hot authorized service technician. Work by during use.
  • Page 5 Do not let the potholder applications. Please contact the touch the hot heating elements. Do not nearest Miele Dealer or the Miele use towels or other bulky items near the Technical Service Department with appliance.
  • Page 6 IMPORTANT SAFETY INSTRUCTIONS Do not use pans that extend past Always position pan handles and the burner grate. Using larger pans utensils inward so they do not extend may cause the flames to spread out over adjacent work areas, burner or the and damage the surrounding edge of the combiset.
  • Page 7 In the event of damage or defect, turn off the appliance immediately. Turn off the gas shut off valve and disconnect completely from the electrical supply. Contact the Miele Technical Service Department. Do not use the appliance until it has been repaired.
  • Page 8 (3.5 kPa). This appliance must be installation in these applications. Please isolated at test pressures equal to or contact the Miele Technical Service less than ½ psi (3.5 kPa). Department with specific requirements. The combiset must not be installed...
  • Page 9 IMPORTANT SAFETY INSTRUCTIONS Safety distances above the appliance The minimum safety distance given by the hood manufacturer must be maintained between the combiset and the hood above it. See the installation instructions of the hood for these safety measurements. If the hood manufacturers instructions are not available or if flammable objects are installed over the combiset (e.g.
  • Page 10 IMPORTANT SAFETY INSTRUCTIONS Safety distances to the sides of the appliance The appliance should only be installed as shown in the illustrations, while 2 " (50 mm) maintaining the required safety distances shown. Do not install the appliance between two tall cabinets, this is a fire hazard.

  • Page 11: Installation

    Installation Safety distance when installing the appliance near a wall with trim or a back splash A minimum distance of 2" (50 mm) between the trim or back splash and the countertop cut-out if required. This distance is only necessary if these items are made of combustible materials e.g.

  • Page 12: Installation Dimensions

    Installation Installation dimensions a Spring clips b Appliance front c Installation height d Power supply box with connection cable, L = 78 3/4" (2000 mm) e Gas fitting...
  • Page 13 Installation Cut out If during installation the seal around the frame does not sit flush with the ^ Make the countertop cut-out for one countertop in the corners, the corner or more appliances as applicable. radius, maximum " (4 mm), can be Remember to maintain a minimum carefully filed down to fit.

  • Page 14: Installation Of Multiple Appliances

    Installation Installation of multiple appliances When installing more than one combiset appliance, a support bar b must be installed between the appliances. Countertop cut-out Countertop cut-out two appliances three appliances 6 " 6 " For the installation of three appliances For the installation of two appliances the width of the countertop cut-out D is the width of the countertop cut-out D is...
  • Page 15 Installation Sample calculations for a countertop cut-out for three appliances appliance width appliance width appliance width Countertop minus 5/16" minus 5/16" cut-out (8 mm) (8 mm) 11" (280 mm) 11 5/16" (288 mm) 11" (280 mm) 33 5/16" (848 mm) 11"...
  • Page 16 Installation " 3 / 1 6 1 " - 1 0 m m ( 2 5 - 3 2 " 2 " ( 5 0 m ( 5 0 m 2 " 2 " " 3 / 1 6 ( 5 0 m ( 5 0 m 6 "...

  • Page 17: Attach The Spring Clips And Support Bars

    Installation Attach the spring clips and support bars Wood or solid surface countertops Granite countertop " 3 / 1 6 " 3 / 1 6 1 " - 1 1 " - 1 0 m m 0 m m ( 2 5 - 3 ( 2 5 - 3 ^ Place the supplied spring clips a ^ Position and attach the spring clips...
  • Page 18 Installation ^ Coat the edges of the spring clips, ^ and the space d between the strips and the countertop with silicone (supplied).
  • Page 19 Installation Installing the appliance ^ Feed the power cord down through the cut-out. ^ Then place the front side of the appliance in the countertop cut-out. ^ Then with a hand on each side of the appliance press down evenly on the edges until it clicks into position.
  • Page 20 Installation Sealing The appliance must not be permanently sealed into the countertop when installed. The sealing strip under the edge of the appliance provides a sufficient seal for the countertop. If the appliance is sealed into position, the countertop or appliance could be damaged if it needs to be removed for maintenance or service.

  • Page 21: Electrical Connection

    Electrical connection This appliance must be grounded This appliance is equipped with a according to local or national codes. three-prong grounding plug to prevent shock hazards. It should be All electrical work should be plugged directly into a properly performed by a qualified electrician grounded outlet.
  • Page 22 Electrical connection Wiring Diagram...

  • Page 23: Gas Connection

    Gas connection Installation and service must be The gas connection must be made performed by a qualified installer, in accordance with local codes or, in service agency or the gas supplier. the absence of local codes, with In Massachusetts a licensed the National Fuel Gas Code, plumber/gas fitter is required.

  • Page 24: Gas Pressure Regulator

    - 4" w.c. LP gas - 10" w.c. Do not use any regulator unless it has been supplied by Miele. Doing so may cause a gas leak. If there is any doubt concerning installation contact the Miele Technical Service Department.
  • Page 25 Gas connection Nominal ratings Maximum output Gas type BTU/hr Natural Gas (NG) 27,600 Liquid Gas 22,200 (Propane) (LP) Minimum output Gas type BTU/hr Natural Gas (NG) 5,700 1.67 Liquid Gas 5,700 1.67 (Propane) (LP)

  • Page 26: Converting To Another Type Of Gas

    If the appliance is to be connected to a type of gas other than it was originally configured for, both the regulator and burner must be converted. A conversion kit is available as an optional accessory from the Miele Technical Service Department.
  • Page 27 Alteration rights reserved / 2608 M.-Nr. 07 369 720 / 00 For the most updated manual see the Miele web site.

Table of Contents