Operation - Bosch ErgoMixx Style MS6CM6120 Instruction Manual

en

Operation

On button Ã
For using the appliance at the preselected
speed. The appliance will continue to run as
long as the button is pressed.
Turbo button Â
For using the appliance at the maximum
speed. The appliance will continue to run as
long as the button is pressed.
Note: The speed setting has no influence
on use of the Turbo button Â.
Caution!
Never press the On button à and the
Turbo button  at the same time.
Recommended speeds
●-8 For mixing liquids and hot food and
for mixing in
8-12 For mixing and pureeing fruit or
cooked vegetables
 For making mayonnaise
Use with: universal cutter (L / XL),
masher attachment, whisk
Release buttons
To remove the blender foot or other
accessories, press both release buttons
simultaneously.
Stainless steel blender foot
The blender foot is suitable for cutting
and mixing mayonnaise, sauces, blended
drinks, baby food, cooked fruit and cooked
vegetables, and for pureeing soups.
Accessories
If an accessory is not included with the
hand blender, it can be ordered from
customer service:
Accessories
Universal cutter L
Universal cutter XL
Whisk
"ProPuree" masher attachment 12027762
12
Operation
W Risk of scalding!
Take care when processing hot food. Hot
food may splash during processing. Leave
boiling food to cool down to 80 °C or less
before processing.
W Risk of injury!
After switching off the appliance, wait for the
blade in the blender foot to come to a stand-
still. Never grip the blade in the blender foot.
Caution!
– The blender foot must be securely
connected to the base unit. The blender
foot must not wobble or fall off.
– Solid foods such as apples, potatoes
and meat always must be cut up and
cooked until soft before processing. Use
the universal cutter for cutting/chopping
raw food (onions, garlic, herbs, etc.).
– The bottom of the receptacle you use
must not have any bumps or steps in it.
X Image sequence B
1. Place the prepared food in the blender
jug or another suitable receptacle or
process in the pan used for cooking.
2. Completely unwind the power cord.
3. Hold the base unit securely, fit the
blender foot onto the base unit and
press until it clicks into position.
4. Set the desired speed with the speed
control dial. Plug the mains plug into the
mains.
5. Hold the receptacle with one hand and
immerse the blender foot.
W Risk of electric shock!
Only immerse the blender foot into the food
as far as the marking Í or there will be
Order no.
a risk of electric shock!
12027759
6. To start processing with the preselected
12027760
speed, press the On button Ã.
12027761
7. To start processing with the highest
speed, press the Turbo button Ã.
Caution!
Never press the On button à and the
Turbo button  at the same time.