10.2 Setup
10.2.1 Overview of Setup
To enable mirroring, the device driver for RAID1 lets the OS recognize two connected drives as
one drive. No installation work is required during setup because the device driver for RAID1 is
set at the factory.
10.2.2 Setting Up a New RAID1
To set up a new RAID1, you need to restore the system to the factory-shipped condition by
using a recovery DVD. To restore the system to the factory-shipped condition, see
"CHAPTER 7 RESTORING THE FACTORY-SHIPPED CONDITION USING A
RECOVERY DVD".
10-3
10. RAID1