Hardware And System Checklist - Toshiba PORTEGE R35-C User Manual

Table of Contents

Advertisement

If you are using the AC adaptor, check that the wall outlet is working by
plugging in another device, such as a lamp.
Verify that the computer is on by looking at the Power indicator.
If the indicator is glowing, the computer is on. Also, try turning the computer
off and then on.
If you are using an AC adaptor, verify that the computer is receiving power
from the external power source by looking at the DC IN/Battery indicator. If
the indicator is glowing, the computer is connected to a live external power
source.
The computer does not load advanced options during
startup
By holding down one of the following keys during startup, your computer
can load the following advanced options.
Key
F2
F12
0 (zero)
If your computer starts to load the Operating System instead of desired
advanced options, do the following:
1.
2.
3.

Hardware and system checklist

This section discusses problems caused by your computer's hardware or
attached peripherals. Basic problems might occur in the following areas:
Power
When the computer is not plugged into an AC power outlet, the battery
pack is the primary power source. However, your computer also has a
User's Manual
Click Start. Point to the arrow (
then select Restart.
Hold down the corresponding key and then release this key one
second after the computer is power on.
Follow the on-screen instructions to proceed.
Power
Keyboard
Internal display panel
Internal Storage
Optical Disc Drive
Memory Media Card
Pointing Device
Advanced option
TOSHIBA Setup Utility
Boot Menu
Recovery options
) beside the Shut down button and,
USB device
Sound system
External monitor
LAN
Wireless LAN
Bluetooth
6-4

Advertisement

Table of Contents
loading

Table of Contents