Windows For Workgroups 3.11 - TRENDnet TE-CF100 User Manual

3. If current settings are acceptable, select
Start Installation and go to step 5.
Otherwise, select Modify Parameters to
change the settings.
4. Move cursor to the field(s) you want to
make changes and press <Enter> to select a
fit value. When the configuration are set
completely, press <Enter> on the OK button
to exit the screen and go back to step 3.
5. Installation program starts to copy related
files from diskette to the destination
directory and modifies AUTOEXEC.BAT under
user's agreement.
6. Reboot your computer to load the driver.

Windows for Workgroups 3.11

NDIS3 Driver for Workgroups
1. Run Windows for Workgroups and click
Network Setup in Network group.
2. In Network Settings dialog box, click
"Networks..."
operating system.
3. In the Networks dialog box, select the radio
button before Install Microsoft Windows
Network and No Additional Network. Press
OK to go back to the Network Settings
screen.
4. Click Drivers... button to select network
driver.
5. In Network Drivers dialog box, press Add
Adapter... button to enter the Add Network
to select
- 26 -
the network