Table of Contents
Advertisement
248
SERVICING AND MAINTENANCE
F
USES
General Information
WARNING!
When replacing a blown fuse, always use an appro-
priate replacement fuse with the same amp rating as
the original fuse. Never replace a fuse with another
fuse of higher amp rating. Never replace a blown
fuse with metal wires or any other material. Do not
place a fuse inside a circuit breaker cavity or vice
versa. Failure to use proper fuses may result in
serious personal injury, fire and/or property damage.
Before replacing a fuse, make sure that the ignition
is off and that all the other services are switched off
and/or disengaged.
If the replaced fuse blows again, contact an autho-
rized dealer.
If a general protection fuse for safety systems (air
bag system, braking system), power unit systems
(engine system, transmission system) or steering
system blows, contact an authorized dealer.
The fuses protect electrical systems against excessive
current.
When a device does not work, you must check the fuse
element inside the blade fuse for a break/melt.
Also, please be aware that using power outlets for
extended periods of time with the engine off may result in
vehicle battery discharge.
Blade Fuses
1 — Fuse Element
2 — Blade Fuse with a good/functional fuse element
3 — Blade fuse with a bad/not functional fuse element
(blown fuse)
Fuse Location
The fuses are grouped into controllers located in the
engine compartment.
Power Distribution Center/Fuses
The Front Power Distribution Center is located in the
engine compartment. This module contains fuses and
relays. Fuse cavity location are printed on the inside of the
power distribution center cover.
CAUTION!
When installing the power distribution center cover, it is
important to ensure the cover is properly positioned
and fully latched. Failure to do so may allow water to get
into the power distribution center and possibly result in
an electrical system failure.
- Quick Links:
- Getting to Know Your Vehicle
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Compass 2023 and is the answer not in the manual?
Questions and answers
what is tonuge weight for 2023 jeep compass trailhawk
The tongue weight for the 2023 Jeep Compass Trailhawk is 200 lb (90 kg).
This answer is automatically generated
Dash lamps will not dim. Too bright at night. How to adjust? Adjustment not working on wheel.
To adjust the dash lamp brightness on a 2023 Jeep Compass, ensure that:
1. The parking lights or headlights are turned on.
2. The built-in light sensor detects low ambient light levels.
The instrument panel dimmer control will only work under these conditions. If the adjustment wheel is not working, check if the headlights or parking lights are on and if ambient light is low. If these conditions are met and it still does not work, the dimmer control may be faulty.
This answer is automatically generated