Non-Hot-Plug Scsi And Sata Hard Drives - HP ProLiant ML310 Generation 3 User Manual
Hide thumbs
Also See for ProLiant ML310 Generation 3:
- Setup and installation manual (170 pages) ,
- User manual (124 pages) ,
- Maintenance and service manual (90 pages)
Table of Contents
Advertisement
40
HP ProLiant ML310 Generation 3 Server User Guide
Server model
Non-hot-plug SCSI
Hot-plug SCSI
Hot-plug SATA/SAS
Non-hot-plug SCSI and SATA hard drives
1. Power down the server ("Powering down the server" on page 21).
2. Remove the bezel ("Unlocking the bezel" on page 22).
3. Remove the access panel ("Removing the access panel" on page 22).
4. Remove the drive cage from the front of the chassis.
Drives supported
Additional required
components
SCSI
N/A
SCSI
N/A
SATA, SAS
SAS controller required
for hot-plug SAS hard
drive
Advertisement
Table of Contents
