ATEN KE8952R-AX User Manual page 271

KVM over IP Matrix System User Manual
Heading
Basic KE Manager Version
Serial Number
KE Manager Name
Description
Language
Beeper
CCKM Timeout
Authentication Lock
Network HTTP Port
Ports
Device Port
HTTPS Port
248
Item
This provides the version of the KE Manager
software.
This provides the serial number and a link to
upgrade the software.
Enter a name for the KE Manager.
Enter a description for the KE Manager.
Select the language for the KE Manager. Choices
are: English, Chinese (Traditional), Simplified
Chinese, Japanese, German, Korean, Russian,
French, Spanish, and Portuguese.
Select Enable to sound a beep from the
Transmitter/Receiver every time a configuration
change is made.
If there is no user input for the amount of time
entered in the box, a user logged into the CCKM
is automatically logged out. Check Disable to turn
this function off.
This function is only supported by KE6910/
KE6912. When accidental power cut happens, the
function allows the user to retain his/her settings
as was shown before the power cut. The user
keeps the same authentication and display.

Uncheck Disable to turn this function on.

Specify a time (in seconds) you wish to keep
the authentication and display for.
When disabled or, if enabled, after the time
specified above, the manager will prompt you to
authenticate when you wish to access the KE
Manager.
Sets the HTTP service port used to access the KE
Manager. This is the port number to use for a
browser login. The default is 8080.
Sets the Device service port used to access the
KE Manager. Configure this port number on the
Transmitter and Receiver to access to the KE
Manager software (see Manager Address,
page 153 and 145). The default is 9110.
Sets the HTTPS service port used to access the
KE Manager. This is the port number to use for a
secure browser login. The default is 8443.
Example: To access the KE Manager with an IP
address of 192.168.0.100 using a secure browser
login, enter: https://192.168.0.100:8443
Description