3.3
Attaching the rails to the rack
To attach the rails to the rack:
1.
Select one unit of space (1U) on the
rack where you wish to install the
server.
2.
Drive in two screws on the rack rails.
3.
Align the front end holes of a rack
rail pair to the 1U space.
4.
Drive in two screws on the outer
holes to secure the front end.
5.
Find the rear 1U space that corresponds to the front 1U space where you attached the
rail. Drive in two screws on the outer holes to secure the rear end.
6.
From the rack front, find the corresponding 1U space for the second rail pair.
7.
Repeat steps 3–5 to attach the second rail pair.
3-4
1U space
Chapter 3: Installation Options