CHAINTECH 7VJL5 User Manual page 23

3. Typematic Delay (Msec)
The typematic delay sets how long after you press a key that a character begins
repeating.
Security Option
The Supervisor and/or User Password functions shown in Figure 3-1 must be set to take
advantage of this function. See Section 3.11 for password setting information. When the
Security Option is set to System, a password must be entered to boot the system or enter
the BIOS setup program. When the Security Option is set to Setup, a password is
required to enter the BIOS setup program.
APIC Mode
In order to cpomly with PC2001 standard, the system is designed to run in APIC
(Advanced Programmable Interrupt Controller) mode. Enabling APIC mode will expand
available IRQs resources for the system. Available options are [Enabled] and [Disabled].
MPS Version Control For OS
This item allows you to select which MPS (Multi-Processor Specification) version is
used for the operating system. You need to select the MPS version which is supported by
your operating system. To find out which version to use, consult the vendor of your
operating system. Available options are [1.4] and [1.1].
OS Select For DRAM >64MB
If your system's DRAM is larger than 64MB and you are running OS/2, select OS/2 as
the item value. Otherwise, set the item value to Non-OS/2 for all other operating systems.
HDD S.M.A.R.T. Capability
This field allows you to Enable or Disable the S.M.A.R.T. (Self-Monitoring, Analysis
and Reporting Technology) system that utilizes the internal hard disk drive monitoring
technology. This parameter is normally set as Disabled because the resources used in the
SMART monitoring feature may decrease the system performance.
HDD Instant Recovery
This setup allows you to Enable/Disable your Hard Drive Instant Recovery.
Video BIOS Shadow
Enabling this function will allow the BIOS setting of the VGA card to be saved in RAM
for better performances.
Small Logo (EPA) Show
This setup allows photo that is EPA. Logo.
Chapter 3
19