Samsung S4343-W User Manual page 55

Table3
This Wireless Detector is intended for use in the electromagnetic environment specified below. The customer This Wireless Detector is intended for use in the electromagnetic environment specified below. The customer This Wireless Detector is intended for use in the electromagnetic environment specified below. The customer This Wireless Detector is intended for use in the electromagnetic environment specified below. The customer
or the user of this Wireless Detector should assure that it is used in such an environment. or the user of this Wireless Detector should assure that it is used in such an or the user of this Wireless Detector should assure that it is used in such an
IMMUNITY test IMMUNITY test
Conducted RF
IEC 61000-4-6
Radiated RF
IEC 61000-4-3
NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies. NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies. NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people. absorption and reflection from structures, objects and people. absorption and reflection from structures, objects and people.
a
Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land
mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted theoretically mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted theoretically mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted theoretically mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted theoretically
with accuracy. To assess the electr with accuracy. To assess the electromagnetic environment due to fixed RF transmitters, an electromagnetic
site survey should be considered. If the measured field strength in the location in which this Wireless Detector site survey should be considered. If the measured field strength in the location in which this Wireless Detector site survey should be considered. If the measured field strength in the location in which this Wireless Detector site survey should be considered. If the measured field strength in the location in which this Wireless Detector
is used exceeds the applicable RF compliance level above, this Wireless is used exceeds the applicable RF compliance level above, this Wireless Detector should be observed to verify is used exceeds the applicable RF compliance level above, this Wireless
normal operation. If abnormal performance is observed, additional measures may be necessary, such as re normal operation. If abnormal performance is observed, additional measures may be necessary, such as re- normal operation. If abnormal performance is observed, additional measures may be necessary, such as re normal operation. If abnormal performance is observed, additional measures may be necessary, such as re
orienting or relocating this Wireless Detector. orienting or relocating this Wireless Detector.
b
Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3 V/m. Over the frequency range 150 kHz to 80 MHz, field strengths sho Over the frequency range 150 kHz to 80 MHz, field strengths sho
Guidance and manufacturer's declaration- Electromagnetic immunity
IEC 60601 TEST Compliance Compliance
LEVEL level level
3 Vrms 3 Vrms
150 kHz to 80 MHz 150 kHz to 80 MHz 150 kHz to 80
3 V/m 3 V/m
80 MHz to 2,5 GHz 80 MHz to 2,5 GHz 80 MHz to 2,5 GHz
omagnetic environment due to fixed RF transmitters, an electromagnetic omagnetic environment due to fixed RF transmitters, an electromagnetic
55
immunity
Electromagnetic environment Electromagnetic environment – guidance
Portable and mobile RF communications Portable and mobile RF communications
equipment should be used no closer to any equipment should be used no closer to any
part of this Wireless Detector, including part of this Wireless Detector, including
cables, than the recommended separation cables, than the recommended separation
distance calculated from the equation distance calculated from the equation
applicable to the frequency of the the frequency of the
transmitter.
Recommended separation distance Recommended separation distance
.
d
√
.
d
√
80 MHz to 800 MHz
d √
800 MHz to 2,5 GHz
P
where is the maximum output power is the maximum output power
rating of the transmitter in watts (W) rating of the transmitter in watts (W)
according to the transmitter manufacturer according to the transmitter manufacturer
and d is the recommended separation is the recommended separation
distance in metres (m).
Field strengths from fixed RF transmitters, Field strengths from fixed RF transmitters,
as determined by an electromagnetic site as determined by an electromagnetic site
a
survey, should be less than the compliance should be less than the compliance
b
level in each frequency range. level in each frequency range.
Interference may occur in the vicinity of Interference may occur in the vicinity of
equipment marked with the following equipment marked with the following
symbol:
Detector should be observed to verify