NEC MultiSync E658 Setup Manual page 11

3. Connect the supplied power cord
WARNING: Please refer to the "Important Information" section for proper selection
of an AC power cord.
Please refer to "WARNING 4", "WARNING 5", and "WARNING 6".
CAUTION: Please refer to "CAUTION 1" and "CAUTION 2".
NOTE: • The monitor should be installed close to an easily accessible power outlet.
• Please make sure that enough power is supplied to the monitor. Please
refer to the "Power Supply" in the specification (See User's manual).
4. Cable information
CAUTION: Use the provided specified cables with this product so as not to interfere
with radio and television reception.
For mini D-Sub 15-pin and USB, please use a shielded signal cable with
ferrite core.
For HDMI and AV cable, please use a shielded signal cable.
Use of other cables and adapters may cause interference with radio and
television reception.
5. Remote control sensor
Be careful not to damage the remote control sensor during installation.
Clamp
English-11
Remote control sensor
EN