Ip Default-Gateway - TP-Link TL-SG3109 Cli Reference Manual
Gigabit managed switch
Hide thumbs
Also See for TL-SG3109:
- User manual (234 pages) ,
- Cli reference manual (202 pages) ,
- Installation manual (32 pages)
Table of Contents
Advertisement
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide
ip default-gateway
The ip default-gateway Global Configuration mode command defines a default gateway (router). To return to the
default configuration, use the no form of this command.
Syntax
ip default-gateway ip-address
no ip default-gateway
Parameters
•
ip-address — Valid IP address of the default gateway.
Default Configuration
No default gateway is defined.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example defines default gateway 192.168.1.1.
Console(config)# ip default-gateway 192.168.1.1
Page 116
Advertisement
Table of Contents
Need help?
Do you have a question about the TL-SG3109 and is the answer not in the manual?
Questions and answers