Important Safety Instructions; Meaning Of Symbols; Notes On Installing - Epson SC-F2200 Series Setup Manual

Introductions
EN
This manual takes you through the steps involved after installation, from assembly through to actual
use. Keep it where it can be used to help resolve any questions you may have regarding the product.

Meaning of Symbols

The Symbols on the Product
The symbols on this Epson product are used in order to ensure safety and proper use of the product
and to prevent danger to customers and other persons, and property damage. The symbols indicate
the meaning below. Be sure that you completely understand the meaning of symbols on this product
before using it.
Caution,
Prohibition Do not touch
Warning
Delicate items
Symbols Used in This Manual
!
Warning
Warnings must be followed to avoid serious bodily injury.
!
Caution
Cautions must be followed to avoid bodily injury.
c
Important : Important must be followed to avoid damage to this product.
Note : Notes contain useful or additional information on the operation of this product.
Caution, keep Alternating
Stand-by
hands clear Current

Important Safety Instructions

EN
This section lists precautions that must be taken to use the product safely and prevent damage to
property or injury to operators or others.

Notes on Installing

Do not obstruct the vents on the product.
If the vents are obstructed, the internal temperature could rise and cause a fire. Do not cover the
printer with a cloth or install it in a location with poor ventilation. Make sure you secure sufficient
space for the installation as described in the manual.
U "Choosing a Place for the Printer" on page 11
Do not setup or use this product in an area where children may come close.
Children may be injured by the equipment.
Do not install or store the printer in an unstable location or a location subject to vibrations from
other equipment.
The printer could fall or tip over and cause an injury.
Do not install the printer in locations subject to oily smoke and dust, or in locations subject to
humidity or where it could easily get wet.
An electric shock or fire could occur.
Do not tilt the product more than 10 degrees forward, back, left, or right while moving it.
Failure to observe this precaution could result in the printer falling over, causing accidents.
Because the product is heavy, it should not be moved by one person.
Four people are needed to move the printer. For information on the product's weight, see:
U User's Guide (Online manual)
When lifting the product, make sure you lift at the locations indicated in the manual.
If you lift holding other parts, the printer may fall, catching your fingers and causing an injury. See
the following for details on lifting the product.
U "Lifting and Carrying the Printer" on page 13
Make sure you use the correct posture when lifting the product.
Lifting using the wrong posture could cause an injury.
Before installing the product, make sure you clear away the packaging sheets, packing
materials, and supplied items from the installation area.
If you slip or trip on these items, it could cause an injury.
When placing the product on a stand with casters (wheels), make sure you secure the casters
before you perform the work so that they do not move.
If the stand moves while you are performing the work, it could cause an injury.
!
Warning
!
Caution
5