Wiring Connections And Startup; Figure 3-2 Rack Mount Hardware Details - Siemens L-828 Manual

L-828 CCRs LC-Type (4, 7.5, and 10 kW/6.6 A/60 Hz)

Figure 3-2 Rack Mount Hardware Details

1. Front of Cabinet
2. Top Back Rail Bolt
3. Nut with Spring
Wiring Connections and
Startup
 2002 Siemens Airfield Solutions, Incorporated
All rights reserved
Rack Mounting
4. Side Rail
5. U-Channel Bolt
6. U-Channel Bracket
The regulator is delivered ready to operate when properly connected
and should not require any electrical adjustments. The contractor
responsible for installation will be required to supply items such as
necessary wire, conduit, connectors, and mounting hardware.
(contd.)
7. Back Rail
8. Bottom Back Rail Bolt
9. Front of U-Channel Bracket
WARNING: Installation and operation of the CCR should be
performed by personnel qualified to work on high voltage
equipment. The high voltage involved with the unit makes
it potentially dangerous and may be lethal if contacted by
operating personnel.
96A0104B
Issued 6/02
Installation
Page 3-3