Table of Contents
Advertisement
Idle Stop And Go (ISG)
if equipped
Idle Stop and Go helps reduce fuel
consumption by automatically shutting
down the engine, when the vehicle is at a
standstill (i.e. red stop light, stop sign, and
traffic jam). ISG system is always active,
when the engine is running.
Information
When the engine is automatically started
by the ISG system, warning lights (e.g.
ABS, ESC, ESC OFF, MDPS, and parking
brake warning light) may illuminate for a
few seconds if the battery voltage is low
and does not indicate a malfunction with
the ISG system.
ISG system operation
Prerequisite for activation
• The driver's seatbelt is fastened.
• The driver's door and hood are closed.
• The brake vacuum pressure is
adequate.
• The battery sensor is activated and the
battery is sufficiently charged.
• Outside temperature is not too low or
too high.
• The vehicle is driven over a constant
speed and stops.
• The climate control system satisfies the
conditions.
• The vehicle is sufficiently warmed up.
• ISG related parts are working properly.
• The incline is gradual.
• The steering wheel is turned less than
180 degrees before the vehicle stops.
Information
If the Auto Stop (
) indicator is white on
the instrument cluster, the ISG system
does not meet the prerequisites above
and is not active. If the Auto Stop (
indicator is yellow, have your vehicle
inspected by an authorized HYUNDAI
dealer.
Auto stop
When ISG is on, the engine stops
automatically when both of the following
occur:
1. Vehicle speed decreases to 0 mph (0
km/h) (full stop condition).
2. Brake pedal is depressed and gear is in
D (Drive) or N (Neutral).
The Auto Stop (
) indicator illuminates in
green on the instrument cluster, when the
engine stops.
Information
Idle stop cannot occur again until the
vehicle speed goes above 3 mph (5 km/h)
and then comes to a full stop again.
In Auto Stop mode, if the hood is opened,
ISG system is deactivated.
When the system is deactivated, the ISG
OFF button indicator illuminates and the
message, "Auto stop is Off. Shift to P or N
and start engine manually" appears on
the cluster display with a warning sound.
If this occurs, depress the brake pedal and
restart the engine manually.
6
)
6-51
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the KONA 2024 and is the answer not in the manual?
Questions and answers
I have owned many vehicles over the years. Radio in my new 2024 KONA is totally baffling and cannot find any reading instructions. Can you help me?
To find the radio instructions for the 2024 Hyundai KONA, refer to the infotainment section in the Quick Reference Guide. Specifically, look for pages titled "Cluster Audio Control" (Page 12) and "Infotainment" features that may include setup for Apple CarPlay, Android Auto, or Bluetooth Audio. For more detailed instructions, consult the vehicle’s Owner’s Manual.
This answer is automatically generated
Is it a common problem that one needs to replace the AC system in Hyundai Kona 2019 model?
I use the remote to unlock doors, but when I walk out to the car, they are locked. It is very annoying to have to re-unlock the car and then have to open the front door and unlock the back door on the armrest. Isn't the remote unlock supposed to unlock all the doors and leave them unlocked until you lock them?
It is a 2024 KonaLTD.
The doors on a 2024 Hyundai Kona lock again after using the remote to unlock them if no door is opened. This is a security feature designed to prevent accidental unlocking and ensure the vehicle remains secure.
This answer is automatically generated